Product Description

The VCP11.2ECN-003-PB-NN-PW is a Rexroth-designed 3.5” TFT operator terminal graphic display, with touchscreen and a 320 x 240 resolution. It is a line-11 IndraControl product, and its design is 2. By mass, the VCP11.2ECN-003-PB-NN-PW has an approximate weight of 0.5 kilograms. This model utilizes a PROFIBUS-DP Fieldbus interface for control communications. Also, it comes with a regenerative semiconductor fuse for overtemperature protection. At 20 degrees C (ambient temp.), the fuse regenerates for about 20 seconds. The regeneration time of the semiconductor fuse could be longer than 20 seconds, depending on the ambient temperature. The VCP11.2ECN-003-PB-NN-PW features a RISC ARM9 CPU, with a clock frequency rated at 200 Megahertz and a 3MB application memory.

The VCP11.2ECN-003-PB-NN-PW features reverse polarity protection so that in the advent of the wrong polarity, it won’t work. This model is protection class-1 device, and for safe operation and SELV, the supply voltage must be in accordance with DIN EN 61131 i.e., nominal voltage equals 24 V DC and min/max voltage equals 18V / 30V DC. The VCP11.2ECN-003-PB-NN-PW is a maintenance-free device, but some of its parts will have to be replaced after certain hours in operation.

This device comes with a diagnostics LED that indicates the state of the system. The PROFIBUS-DP cables of this model have a loop impedance of 110 Ohm/km and wave impedance of 136 – 165 Ohm. The baud rate of the PROFIBUS-DP cable varies depending on its length. The minimum recommended installation clearance around the VCP11.2ECN-003-PB-NN-PW is 1.181” (30 mm) to facilitate the adequate circulation of air. The protection class of the rear and front of this device is IP 20 and IP 65 respectively. This unit can be shipped globally with a one-year warranty period from Wake Industrial.