Product Description:

The VCP11.2EDN-003-NN-NN-PW is an operator terminal manufactured by Bosch Rexroth Indramat for the VCP IndraControl Terminals series. The unit serves as a compact visualization and control point inside automated machinery, allowing operators to view status information and adjust parameters directly at the cabinet door. With its small enclosure and low power requirements, it is suited for installations where space inside the electrical panel is limited yet a dedicated display is still required for local interaction with the automation system.

Its internal electronics are coordinated by a 200 MHz processor that manages program execution and screen refresh without external controllers. Runtime data is held in 3 MB of application memory, while system files and recipes reside in a non-volatile 16 MB flash store, so the terminal retains settings after power loss. Power is supplied at 24 V DC, and under nominal conditions the connected load is only 6 W, which helps minimize heat generation inside sealed cabinets. The housing measures 130 mm in width, 96 mm in height, and 55 mm in depth, allowing it to fit into a standard 92 × 92 mm panel cutout with a shallow rear protrusion that eases mounting in crowded enclosures.

Operator feedback is provided by a monochrome FSTN display that spans 3.8 in diagonally and renders graphics at 320 × 240 pixels, which is sufficient for text, trend lines, and simple mimic diagrams. Touch input is accepted through an analog resistive 4-wire screen, so gloves and styluses can be used in industrial areas. The front panel carries an ingress rating of IP65, whereas the rear area is limited to IP20, matching typical control-cabinet environments. Communication is handled through 1 × Ethernet 10/100 Base-T and two USB host ports for recipe transfer or service keyboards.