VCP11.2EBN-003-PB-NN-PW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911170997
The Bosch Rexroth Indramat VCP11.2EBN-003-PB-NN-PW is part of the VCP IndraControl Terminals series and is equipped with a 3.5-inch TFT graphic display featuring a 320 x 240 pixel resolution. It runs on a 200 MHz RISC ARM9 processor, includes 32 MB SDRAM and 16 MB flash memory, and supports PROFIBUS DP fieldbus connectivity. The terminal is also fitted with an analog resistive 4-wire touchscreen and offers a USB interface with a maximum data rate of 12 Mbit per second.
Internal Product Review
The VCP11.2EBN-003-PB-NN-PW is an IndraControl terminal that stands out with a TFT graphic display and PROFIBUS DP connectivity. A RISC ARM9 processor with a 200 MHz clock gives the platform responsive performance for operator interface tasks. The analog resistive 4-wire touchscreen supports dependable input handling, making this terminal an excellent fit for practical industrial HMI service.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VCP11.2EBN-003-PB-NN-PW operator terminal is produced by Bosch Rexroth Indramat within the VCP IndraControl Terminals series. Designed as a compact human-machine interface, the unit provides visualization and parameter entry for PLC-controlled machinery through an integrated touchscreen. Its 3.5-inch color panel, shallow 5 mm front depth, and 96 mm by 130 mm bezel allow direct mounting on cabinet doors where space is limited. By combining graphical output, tactile input, and an onboard processor, the terminal delivers localized control without the need for a separate industrial PC.
The terminal’s computing platform centers on a 200 MHz CPU based on the RISC ARM9 architecture, giving adequate cycle time for screen refresh, communication, and logic preprocessing. Transient data and active program variables reside in 32 MByte of SDRAM, while application files are stored in 16 MByte of flash memory that retains project data during power loss. An additional 3 MByte of dedicated application memory is reserved for recipe values and alarm lists that must load quickly at start-up. This hierarchy of volatile and non-volatile storage supports most small to mid-sized HMI projects without external expansion and keeps boot sequences under a few seconds.
The display is a 3.5 in TFT with a resolution of 320 × 240 px, and it uses a 4-wire analog resistive touchscreen suited for gloved use. Field communication to drives and remote I/O is established over PROFIBUS DP, which allows cyclic exchange of setpoints and diagnostic bits with the host controller. A USB device port offers data logging and project download at up to 12 Mbit/s, sourcing 100 mA to a memory key or barcode reader. These features support front-panel installation in tight enclosures while maintaining standard industrial interface capability.
