Product Description:

The Bosch Rexroth Indramat VCP02.2DRN-003-SR-01-PW is an operator terminal in the VCP IndraControl Terminals series. Intended for machine-level visualization and input, the unit ties HMI functions directly to PLC or motion controllers on the plant floor. Its compact panel format allows mounting in small cabinets while still providing the display, keypad, and communication resources required for routine parameter entry, alarm acknowledgment, and process status viewing in automated equipment. It is suited for local interface tasks where operators need to navigate menus, review messages, and acknowledge faults at the machine.

Processing tasks on the terminal are handled by a RISC ARM9 processor running at 200 MHz that drives the monochrome 160 x 80 pixel screen. The display area measures 7.6 cm (3 in.), giving operators a fixed window for text messages and simple graphics. Firmware, project files, and operating system components reside on 16 MB of onboard flash, allowing updates without external storage. A regulated 24 V DC supply powers the electronics, and typical consumption stays below 5 W, which helps limit heat inside enclosures. Overall dimensions are 144 mm wide, 96 mm high, and 58 mm deep, which lets the device fit a standard 92 x 138 mm cutout so retrofits rarely need sheet metal changes.

The front face is rated at IP65, while the rear section carries an IP20 designation for protected cabinet spaces. Network integration uses one Ethernet TCP/IP port for peer-to-peer data exchange or programming, and legacy links remain available through the RS232/RS485 serial interface. Removable data transfer is possible through two USB host connectors, and four tactile function keys provide direct command access. The HMI allocates 3 MB of application memory exclusively to user screens and scripts, keeping control projects separate from system code. The serial connection also supports integration with older equipment that still relies on point-to-point communications.