VAM41.1-PB-ND-AB-TA-VA-BA-1608-L1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911171070
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VAM41.1-PB-ND-AB-TA-VA-BA-1608-L1 is part of the VAM Machine Operator Panels series and has a communication bus of PROFIBUS DP. It features 16 digital inputs, 8 digital outputs, and operates with a 24 V DC I/O and logic supply. The panel measures 407 mm in width, 210 mm in height, 102 mm in depth, and has an IP54 degree of front protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VAM41.1-PB-ND-AB-TA-VA-BA-1608-L1 is an operator interface panel produced by Bosch Rexroth Indramat and supplied within the VAM Machine Operator Panels series. It serves as the human-machine gateway on modular machines by presenting process data, alarm messages, and operating states while relaying commands between field devices and higher-level controllers. Its keypad and display arrangement give operators a direct point for routine input, fault acknowledgment, and status monitoring during machine operation. The panel is intended for industrial automation cells that need compact mounting and direct field wiring.
The unit communicates over PROFIBUS DP, allowing cyclic data exchange with decentralized I/O stations and drive controllers. Its front membrane has a protection rating of IP54 at the front, so dust and water splashes encountered on production lines do not affect the keypad or display area. Control inputs are accepted through 16 isolated digital channels, while actuator signals are returned through 8 transistor outputs. A panel-mounted fuse rated at 3 A protects the internal 24 V rails against short circuits or reverse wiring. This layout supports straightforward exchange of command bits, interlock signals, and indicator feedback between the panel and the connected automation system. Lamps, pushbuttons, and other simple control devices can be connected directly through the panel I/O.
Physical installation uses a depth of 102 mm and requires 80 mm of clearance behind the mounting plate. The housing stands 210 mm tall, spans 407 mm wide, and fits a cabinet cutout measuring 178 mm high by 375 mm wide. Field modules draw up to 1.7 A from the I/O supply, while logic circuitry is limited to 0.5 A; both rails share a nominal bus voltage of 24 V DC. The panel has a mass of 1380 g, and rear screw clamps keep the wiring harness inside the enclosure for a clean installation. The shallow body also helps the unit fit enclosures where door depth is limited and cable routing must remain organized behind the panel.
Frequently Asked Questions about VAM41.1-PB-ND-AB-TA-VA-BA-1608-L1:
Q: What communication bus is supported by the VAM41.1-PB-ND-AB-TA-VA-BA-1608-L1 operator panel?
A: The VAM41.1-PB-ND-AB-TA-VA-BA-1608-L1 panel uses the PROFIBUS DP communication bus for system integration.
Q: What is the degree of protection at the front panel of the VAM41.1-PB-ND-AB-TA-VA-BA-1608-L1?
A: This operator panel provides a front degree of protection rated at IP54.
Q: How many digital inputs does the VAM41.1-PB-ND-AB-TA-VA-BA-1608-L1 have?
A: Sixteen digital inputs are available on this model for interfacing with external devices.
Q: What is the I/O supply voltage required for the VAM41.1-PB-ND-AB-TA-VA-BA-1608-L1 panel?
A: The VAM41.1-PB-ND-AB-TA-VA-BA-1608-L1 accepts a 24 V DC supply for its I/O operations.
Q: What is the required mounting cutout width for the VAM41.1-PB-ND-AB-TA-VA-BA-1608-L1?
A: This operator panel features a mounting cutout width of 375 mm for installation.
