VAM15.1-S3-NF-NN-TB-TA-VD-NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911173752
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VAM15.1-S3-NF-NN-TB-TA-VD-NN is part of the VAM Machine Operator Panels series and operates on a 24 V DC logic supply with a typical logic current of 0.3 Amps. It has 16 digital inputs and 16 digital outputs, a front panel rated at IP54, and uses Sercos III communication with a transmission rate of 100 MBit/s. The panel measures 422 mm wide, 169 mm high, 84.1 mm deep, and weighs 2120 grams.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VAM15.1-S3-NF-NN-TB-TA-VD-NN is an operator panel manufactured by Bosch Rexroth Indramat for the VAM Machine Operator Panels series. It provides front-line interaction between the CNC or PLC and machine operators by combining push-buttons, override dials, and status LEDs in one sealed assembly. Within an automation cell, the panel relays operator commands to the control system and displays system responses without opening the main electrical cabinet.
This model communicates with the control network through the Sercos III real-time bus, and its Ethernet-based link supports a 100 MBit/s transmission rate over distances up to 100 m. The front surface carries an IP54 rating, so splashing coolant or airborne dust will not interrupt operation. Sixteen input channels let the PLC evaluate sensor or switch states, while 16 digital outputs drive stack lights, contactors, or solenoids up to the panel’s rated 0.2 A per channel. A 24-step feed override and a 16-step spindle override give the user discrete speed adjustment with clear detents. A depth of 84.1 mm allows mounting inside shallow enclosures without colliding with other cabinet components.
The logic section is powered from 24 V DC supplied by the machine control, drawing a typical 0.3 A while the internal electronics operate. A board-mounted 4 A fuse disconnects the panel if an external short occurs, limiting downstream damage. At 2120 g, the assembly adds minimal mass to pendant arms or front-door mounts. The housing spans 422 mm in width and 169 mm in height, so it aligns with standard cutout patterns used on machining centers. During production, override commands and digital I/O signals share the same real-time bus, so response remains immediate during routine machine adjustments.
Frequently Asked Questions about VAM15.1-S3-NF-NN-TB-TA-VD-NN:
Q: Which communication protocol is supported by the VAM15.1-S3-NF-NN-TB-TA-VD-NN panel?
A: The VAM15.1-S3-NF-NN-TB-TA-VD-NN communicates via the Sercos III bus.
Q: What level of environmental protection does the front panel of the VAM15.1-S3-NF-NN-TB-TA-VD-NN provide?
A: This operator panel's front panel offers an IP54 degree of protection against dust and water.
Q: What is the logic supply voltage required for the VAM15.1-S3-NF-NN-TB-TA-VD-NN operator panel?
A: The logic supply for this panel is 24 V DC.
Q: How many digital inputs does the VAM15.1-S3-NF-NN-TB-TA-VD-NN provide?
A: It has 16 digital inputs, allowing multiple device or sensor connections.
Q: What is the maximum supported bus length for the VAM15.1-S3-NF-NN-TB-TA-VD-NN operator panel?
A: The maximum bus length supported is 100 meters.
