VAM10.3-S3-NF-TA-TA-VD-1616-FP Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911173165
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VAM10.3-S3-NF-TA-TA-VD-1616-FP belongs to the VAM Machine Operator Panels series and features a SERCOS III communication bus. It supports 16 digital 24 V inputs and 16 digital 24 V outputs, with a supply voltage of 24 V DC. The panel offers front protection rated at IP54 and measures 350 mm in width and 169 mm in height.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VAM10.3-S3-NF-TA-TA-VD-1616-FP is an operator panel produced by Bosch Rexroth Indramat within the VAM Machine Operator Panels series. Designed for CNC machines and automated cells, the device combines push-buttons, override dials, and digital I/O in one front-mount housing that brings common machine controls together in a single interface. Through this unit, operators can issue start, stop, jog, or feed commands directly to the motion controller, so process adjustments can be made at the machine rather than from a remote console.
Communication with the control network is handled over SERCOS III, providing cycle-synchronous transfer of status bits and override values between the panel and the connected control system. All field wiring is referenced to a dedicated 24 V DC I/O rail that can deliver up to 3.5 A when every output is energized. The panel offers 16 digital 24 V inputs for limit switches or sensor contacts, and these channels share an internal fuse rated at 4 A to isolate faults. Protection of the front membrane, selector keys, and indicator LEDs is confirmed by an IP54 rating, so airborne coolant or dust does not interrupt operation on the shop floor. The logic electronics draw only 0.3 A typically, and the two membrane keypads each have fifteen keys for direct function access without an external keyboard.
For motion optimization, the handwheel interface supports 24 feed override stages, letting the cutting or traverse rate be stepped from low to full speed, while the main spindle can be trimmed independently in 16 spindle override stages. Cabinet designers require a rectangular opening of 322 x 141 mm, which allows the housing's 350 mm width and 169 mm height to sit flush with the machine fascia and maintain the front protection level. Because power dissipation is minimal, the panel runs without fans, and the keyed layout helps operators make adjustments while wearing gloves in splash zones or other demanding work areas.
Frequently Asked Questions about VAM10.3-S3-NF-TA-TA-VD-1616-FP:
Q: What communication bus does the VAM10.3-S3-NF-TA-TA-VD-1616-FP use?
A: The VAM10.3-S3-NF-TA-TA-VD-1616-FP operator panel is equipped with SERCOS III communication for connectivity.
Q: How many digital outputs are available on the VAM10.3-S3-NF-TA-TA-VD-1616-FP panel?
A: This panel features 16 digital 24 V outputs for controlling connected devices.
Q: What kind of front protection does the VAM10.3-S3-NF-TA-TA-VD-1616-FP provide?
A: With IP54 front protection, this model is resistant to dust and water splashes on the front side.
Q: What is the maximum I/O current supported by the VAM10.3-S3-NF-TA-TA-VD-1616-FP?
A: The operator panel supports a maximum I/O current of 3.5 A for its input and output operations.
Q: How many feed override stages are available on the VAM10.3-S3-NF-TA-TA-VD-1616-FP?
A: There are 24 feed override stages provided on this operator panel for precise feedrate adjustment.
