SR-L1.0023.060-14.819 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
25 Seconds
The Bosch Rexroth Indramat SR-L1.0023.060-14.819 is a synchronous servo motor from the SR Synchronous Servo Motors series. It features a resolver encoder with ±10 arcminute accuracy and a rated speed of 6000 rpm. The motor has a locked-rotor torque of 2.3 Nm and a flange size of 70 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR-L1.0023.060-14.819 belongs to the SR Synchronous Servo Motors series manufactured by Bosch Rexroth Indramat. This compact rotary unit is intended for closed-loop axis control in assembly cells, pick-and-place gantries, and similar automation where high positioning accuracy and repeatable velocity are required. By integrating an electromechanical brake and resolver feedback, the motor provides holding capability during idle states and real-time rotor position information to the drive controller. That combination supports compact servo axes that must start, stop, and reposition frequently without adding separate holding hardware.
Its electromechanical brake engages with 2.0 Nm of static torque while drawing only 0.4 A from the control supply. The coil is energized at 24 VDC, allowing simple connection to common machine control circuits. The brake releases after 20 ms when energized and re-engages in 30 ms when de-energized, providing predictable stopping behavior during emergency disable sequences. System inertia is minimized by a brake mass moment of 0.12 × 10⁻⁴ kg·m², and the rotor itself contributes 1.20 × 10⁻⁴ kg·m². A square 70 mm mounting flange accommodates direct attachment to compact gearheads, and the Ø11 × 23 mm keyed shaft transmits torque without additional adapters. This layout helps keep the motor package compact on short-axis mechanisms and small mounting plates.
For dynamic motion phases, the motor develops 2.3 Nm of locked-rotor torque and sustains rotation up to 6000 rpm at nominal drive voltage. The magnetic circuit generates output proportionally to current with a torque constant of 0.69 Nm/A, which supports predictable current-to-torque response in the drive. Position feedback is delivered by an integrated resolver with ±10 arc-minute accuracy and a resolution of 8192 incr/rev, supporting interpolation down to fine increments inside the drive. The feedback system lets the controller monitor shaft position during acceleration, reversal, and holding tasks on light moving loads.
