Product Description:

The SR-L1.0023.060-10.000 synchronous servo motor is produced by Bosch Rexroth Indramat within the SR Synchronous Servo Motors series. Intended for industrial automation, this permanent-magnet AC unit converts commanded phase currents into tightly regulated rotary motion for pick-and-place heads, small gantries, and light spindle stations. Its electrical design aligns with standard Rexroth digital drives, giving machine builders a compact option when fast positioning and moderate holding capability are required.

A flange measuring 70 mm forms the mounting interface and lines up with common gearheads or brackets. The motor sustains a rated shaft velocity of 6000 rpm, enabling rapid indexing cycles in packaging or electronic assembly lines. With a torque constant of 0.69 Nm/A, the controller can calculate commanded current precisely to achieve the needed drive torque. If motion is obstructed, the electromagnetic structure delivers 2.3 Nm of locked-rotor torque so clamping devices can be held without external brakes. Its sealed housing carries an ingress rating of IP67, except at the output flange, permitting temporary immersion and high-pressure spray cleaning. Position and speed feedback originate from a resolver that yields 8192 increments per revolution for commutation and control loops.

Installation weight is limited to 2.6 kg, reducing inertial load on linear axes and minimizing counterbalance requirements. Dynamic responsiveness is assisted by a rotor inertia of 1.20×10^-4 kg·m², allowing the shaft to reverse direction quickly when commanded. An overall motor length of 236 mm helps the unit fit into compact machine layouts. The smooth shaft is manufactured to Ø11 × 23 mm dimensions, facilitating press-fit couplings or clamp collars without keyways. During stall or start events, the windings can draw up to 3.3 A of locked-rotor current, a value the drive must tolerate through its current-limit function.