SR-L1.0016.060-14.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 1070919226
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
18 Seconds
The Bosch Rexroth Indramat SR-L1.0016.060-14.000 is part of the SR Synchronous Servo Motors series and features a body diameter of 75 mm with a pilot diameter of 60 mm. It supports a rated speed of 6000 rpm and provides a standstill torque of 1.6 Nm with a standstill current of 2.2 A. This motor is equipped with a resolver encoder and is rated for IP67 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR-L1.0016.060-14.000 synchronous servo motor is built by Bosch Rexroth Indramat and belongs to the SR Synchronous Servo Motors series. Intended for high-speed positioning tasks in industrial automation, the unit converts controlled three-phase drive output into precise rotary motion for pick-and-place modules, compact actuators, and indexing mechanisms. Its compact cylindrical frame fits inside sealed machine enclosures, and closed-loop control keeps motion axes synchronized with drive commands. This layout supports repeatable motion in compact equipment where fast response and stable feedback are important.
This model has a nominal shaft speed of 6000 rpm, allowing rapid cycle times, while the standstill torque of 1.6 Nm supports load holding when motion is stopped. The electromagnetic design produces that torque from a standstill current of 2.2 A, and each ampere of current adds torque in line with the motor constant of 0.73 Nm/A. The motor has a cylindrical housing with a body diameter of 75 mm and a 60 mm pilot diameter, which helps simplify flange integration. Overall rotor inertia, including the resolver, is 1.1 × 10⁻⁴ kg·m², and the shaft measures Ø11 × 23 mm to suit common couplings. These electrical values and inertia data support accurate acceleration planning and stable drive matching.
The integrated holding brake supplies 2.5 Nm of torque at 120 °C, is rated for 12 W, and adds 0.3 kg to the assembly while contributing a brake inertia of 0.38 × 10⁻⁴ kg·m². With the brake installed, the overall length reaches 237 mm, and the motor still maintains an IP67 enclosure rating for use in washdown or dust-laden areas. Position feedback is provided by a Resolver, which returns analog angle signals that remain dependable in electrically noisy environments. The brake helps hold the shaft when power is removed, which can reduce load drift on vertical axes. This combination of sealing, brake function, and analog feedback suits enclosed machinery that operates in demanding plant conditions.
