SR-L1.0016.060-04.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
56 Seconds
The Bosch Rexroth Indramat SR-L1.0016.060-04.000 is part of the SR Synchronous Servo Motors series and has a motor mass of 2.31 kilograms with a motor length of 240 millimeters. It features an encoder resolution of 8192 increments per revolution with a resolver encoder type, and its rated speed is 6000 revolutions per minute. The motor has a brake holding torque of 2.0 Newton meters and a shaft diameter of 11 millimeters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR-L1.0016.060-04.000 is a synchronous servo motor produced by Bosch Rexroth Indramat within the SR Synchronous Servo Motors series. It converts controlled electrical input into precise mechanical motion for positioning axes, pick-and-place arms, and small transfer stations used in industrial automation lines. Its compact form suits machines where installation space is limited and where accurate repeatability is needed during frequent starts, stops, and short indexing moves. It is well suited for automated assemblies that depend on smooth acceleration, precise stopping, and stable feedback during repetitive motion.
The rotor can reach a rated speed of 6000 rpm, allowing fast cycle times in compact machinery. A torque constant of 0.67 Nm/A links drive current to output torque, so the controller can predict shaft force accurately. During startup or when motion is blocked, the motor withstands a locked-rotor current of 2.4 A and delivers up to 1.6 Nm of stall torque without thermal damage. Mounting follows an IEC square flange pattern with a 70 mm frame side, and the moving parts present a combined inertia of 0.83 × 10−4 kg·m² including the feedback device. The motor also has an 11 mm diameter shaft that extends 23 mm beyond the front face, an overall housing length of 240 mm, and a mass of 2.31 kg.
An electrically released holding brake rated at 24 VDC draws only 0.4 A and produces a static clamping force of 2.0 Nm, preventing load drift when power is removed. The brake adds only 0.12 × 10−4 kg·m² of inertia, so dynamic response remains close to the base motor figures. For position feedback, an integrated resolver provides multi-turn data, and its interpolated resolution reaches 8192 increments per revolution, enabling tight loop control at very small motion steps. This helps maintain positional consistency during rapid reversing and short dwell periods. The motor is suitable for indexing tables, light packaging transport, and other duty cycles that require high speed, controlled stall capability, and secure holding.
