SR-L1.0008.060-14.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
12 Seconds
The Bosch Rexroth Indramat SR-L1.0008.060-14.000 is part of the SR Synchronous Servo Motors series, featuring a rated speed of 6000 min^-1 and an IP67 protection type. This motor uses natural convection for cooling, comes with a resolver encoder, and produces a noise level of 58 dB(A). The construction type is IM B5 and it has a shaft diameter of 11 mm with shock resistance rated at 6 g.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR-L1.0008.060-14.000 synchronous servo motor is produced by Bosch Rexroth Indramat for the SR Synchronous Servo Motors series. Within an automation cell, it acts as the electromechanical interface between the motion controller and the driven mechanics, providing programmable speed and position control for feeders, indexing tables, or light handling axes. Its resolver feedback supports closed-loop performance demanded in repetitive industrial cycles.
Mechanically, the motor follows the IM B5 form, so the face flange carries the radial loads while the housing stays stationary. The flange pilot is specified at Ø60 j6, and the shaft measures Ø11 k6; these tolerances permit slip-fit alignment with standard gearheads in the IEC 72-2 / DIN 42 948 pattern. Electrically, a standstill current of 1.1 Arms maintains torque without overheating, and the winding can accelerate the rotor toward its rated speed of 6000 rpm under servo regulation. The enclosure achieves IP67 ingress protection, so dust or temporary liquid immersion will not disturb operation. Natural convection removes internally generated heat, and a resolver mounted on the rear supplies shaft angle feedback to the controller. A built-in thermal sensor tracks winding temperature between −5 °C and 155 °C to prevent insulation damage.
In service, the motor adds minimal acoustic burden; its sound pressure level reaches only 58 dB(A) at nominal load. Machinery exposed to vibration benefits from the unit’s ability to tolerate shocks up to 6 g without loss of calibration or bearing damage. Reliable duty is ensured when ambient air stays within 0 to 40 °C, matching most cabinet-free machine zones. Position accuracy derives from the resolver’s interpolation capability of ±10 arcmin / 8192 incr rev, giving the controller fine resolution for speed loops and incremental moves.
