SR-L0.0009.060-00.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
31 Seconds
The Bosch Rexroth Indramat SR-L0.0009.060-00.000 is part of the SR Synchronous Servo Motors series and features a flange size of 55 mm and a shaft with a keyway and feather key. This servo motor has a DC link voltage of 670 V, a locked-rotor current of 1.3 A, and a rated speed of 6000 min-1. It includes an IP67 flange seal and a resolver encoder with a precision of plus or minus 10 angular minutes.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR-L0.0009.060-00.000 is produced by Bosch Rexroth Indramat within the SR Synchronous Servo Motors series. The unit serves as a compact actuating element for CNC axes, pick-and-place modules, and other motion loops that require repeatable torque delivery and fast speed changes. By combining permanent-magnet excitation with sensor feedback, the motor converts DC bus energy from a compatible drive into controlled mechanical rotation for industrial automation tasks. Its mechanical interface and electrical characteristics are aligned with modular drive platforms. This supports accurate acceleration and deceleration during short positioning moves.
The winding set is supplied from a DC link of 670 V, allowing rapid current rise and dynamic response. When the shaft is locked, the motor can withstand 0.95 Nm while drawing 1.3 A, a combination that helps protect coupled gear trains during startup checks. Under normal operation, it reaches a nominal speed of 6000 rpm, matching light-duty positioning cycles. The electromagnetic design delivers a torque constant of 0.73 Nm/A, so the controller can relate output torque directly to phase current. Despite these ratings, the housing weighs only 1.6 kg, which helps reduce moving mass on gantries and other compact axes.
The mechanical interface uses a 55 mm square flange that aligns the stator with standard machine frames, and the output end carries a keyway with feather key on a 9 × 20 mm shaft for positive torque transmission. An external seal with a rating of IP67 blocks coolant and dust from the bearing pocket. Position feedback comes from a resolver with a resolution of 8192 increments per revolution and a precision of ±10 angular minutes, giving the drive continuous electrical angle data without fragile optical components. Rotor inertia is 0.25 × 10⁻⁴ kg·m², and the overall length is 171 mm, which keeps the motor compact for narrow axes.
