SR-L0.0008.060-14.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
53 Seconds
The Bosch Rexroth Indramat SR-L0.0008.060-14.000 is a synchronous servo motor from the SR Synchronous Servo Motors series featuring a resolver encoder type and a flange size of 55 mm. This motor offers a brake holding torque of 1.0 Nm, brake rated current of 0.5 A, and operates at a rated speed of 6000 min^-1. Shaft size is 9 x 20 mm, and the torque constant is 0.67 Nm/A.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR-L0.0008.060-14.000 synchronous servo motor is produced by Bosch Rexroth Indramat and belongs to the SR Synchronous Servo Motors series. Designed for tightly integrated machinery axes, it converts electrical power into precise rotary motion for positioning, indexing, or speed-controlled processes on assembly lines and pick-and-place units. The combination of resolver feedback and an integrated holding brake lets the drive controller regulate velocity during motion and hold the load when power is removed. This arrangement supports compact machine layouts where accurate stopping and controlled restart behavior are required.
At its rated operating point, the rotor reaches 6000 rpm, a speed level suitable for high-cycle automation. A torque constant of 0.67 Nm/A links phase current to developed torque, allowing the drive to estimate mechanical output without external sensors. During a startup stall, the winding may draw 1.2 A and deliver 0.8 Nm of locked-rotor torque, values that help determine protective device selection and acceleration settings. The assembled rotor has an inertia of 0.15 × 10⁻⁴ kg·m², and the square mounting flange measures 55 mm; together with a Ø9 × 20 mm shaft, these dimensions suit compact couplings and small gearheads. Resolver precision is ±10 angular minutes, and the feedback device supplies position data for baseline control loops in packaging and electronics handling equipment.
The electromechanical brake operates from a 24 VDC supply and draws only 0.5 A, yet it generates a holding torque of 1.0 Nm to keep vertical loads from drifting. Added inertia of 0.068 × 10⁻⁴ kg·m² and a brake mass of 0.18 kg have minimal effect on servo responsiveness, so motion behavior remains stable when the brake is included. When motion stops, the drive still resolves shaft position to 8192 increments per revolution, allowing accurate homing moves and repeatable indexing tasks. The integrated brake and resolver also reduce the need for separate external components around the axis.
