SR-L0.0008.060-04.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat SR-L0.0008.060-04.000 is part of the SR Synchronous Servo Motors series and features a resolver encoder with ±10 arcmin accuracy and 8192 increments per revolution. It delivers a rated speed of 6000 rpm, provides 0.8 Nm standstill torque, and includes a holding brake with 1.2 Nm torque at 24 VDC. The servo motor uses a keyway output shaft and measures 178 mm in length with the brake.
Internal Product Review
The SR-L0.0008.060-04.000 is a Bosch Rexroth Indramat synchronous servo motor with a rated speed of 6000 rpm and standstill torque of 0.8 Nm. Resolver feedback with 8192 incr/rev supports stable position tracking and smooth tuning in precision motion applications. An integrated 24 VDC brake delivering 1.2 Nm holding torque adds dependable stopping performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR-L0.0008.060-04.000 synchronous servo motor is produced by Bosch Rexroth Indramat as a member of the SR Synchronous Servo Motors series. Designed for compact axes in automated assembly stations, it converts drive current into precisely controlled rotary motion that can be tightly synchronized with PLC command loops. The unit integrates a permanent-magnet rotor and an embedded feedback system to deliver repeatable position, speed, and torque profiles suited for pick-and-place heads, indexing tables, and small tooling spindles.
The motor reaches a rated speed of 6000 rpm, allowing high-cycle performance while remaining within the shaft’s mechanical limits. The shaft has a keyway machined into its 9 mm diameter by 20 mm journal for positive coupling. At standstill, the motor can develop 0.8 Nm of torque from a phase current of 1.1 A. This current-to-torque relationship is based on a torque constant of 0.7 Nm/A, so load response can be predicted from current commands. The brake coil is energized by 24 VDC, aligning the electrical interface with standard machine supply rails. The brake has an inertia of 5.5 × 10⁻⁶ kg·m² and a mass of 0.19 kg, which help keep reflected inertia low and preserve acceleration capability. The output shaft keyway simplifies power transmission to belts, gears, or couplings without requiring additional hub machining.
When power is removed, the integrated holding brake locks the rotor with 1.2 Nm of torque, preventing drift on vertical axes. The coil consumes only 8 W during release, which limits the thermal load inside the control cabinet. High-resolution feedback is provided by a resolver that produces 8192 increments per revolution and maintains ±10 arcminutes of positional accuracy, enabling precise motion profiles without an external encoder. With the brake installed, the overall case length is 178 mm, allowing the motor to fit into narrow machine frames while providing the thermal mass needed for continuous torque output.
