SR-L0.0004.060-10.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat SR-L0.0004.060-10.000 is part of the SR Synchronous Servo Motors series and features a resolver encoder with an accuracy of ±10 angular minutes and 8192 increments per revolution. This servo motor has a flange width of 55 mm, a mass of 1.2 kg, and an IP67 protection type. It delivers a locked-rotor torque of 0.4 Nm and operates at a rated speed of 6000 min-1.
Internal Product Review
The SR-L0.0004.060-10.000 is a Bosch Rexroth Indramat synchronous servo motor with IP67 protection and resolver feedback. Rated speed of 6000 min-1 and resolver accuracy of ±10 angular min support fast, stable axis control in demanding automation service. IM B5 mounting and 1.2 kg mass make integration straightforward, making the motor a strong choice for compact high-performance servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR-L0.0004.060-10.000 synchronous servo motor is produced by Bosch Rexroth Indramat within the SR Synchronous Servo Motors series. It serves as a compact electromechanical actuator that delivers controlled torque and speed to indexing tables, pick-and-place heads, or light gantry axes where fast positioning cycles are required. Its compact format suits machines where installation space is limited and low moving mass helps shorten cycle times. In these applications, the motor works with a servo drive to provide repeatable acceleration, controlled deceleration, and stable position holding during frequent starts and stops.
The motor’s square mounting face offers a flange width of 55 mm, and the centering is set by a 40 mm pilot diameter machined to j6 tolerance. A face mount pattern that follows the IM B5 layout lets the unit bolt directly to gearheads or machine frames without additional brackets. During continuous operation, the shaft can reach 6000 rpm, and this upper speed limit sets the electrical frequency range the drive must supply. The motor develops torque in proportion to current, with a torque constant of 0.62 Nm/A, which supports predictable current-to-torque response during drive tuning. When the shaft is blocked, the stator generates a locked-rotor torque of 0.4 Nm, a value used when sizing couplings or detent brakes. Additional hardware includes a 9 mm shaft diameter with k5 tolerance, a shaft length of 20 mm, and a resolver mounted on the rear that provides ±10 angular minutes of feedback accuracy.
Start-up current peaks at 0.65 A, and the system must supply this value briefly until motion begins. An enclosure rating of IP67 keeps dust and water from reaching the windings, making the motor suitable for washdown areas. The aluminum housing weighs only 1.2 kg, and the active rotor inertia of 0.09 × 10⁻⁴ kg·m² supports rapid acceleration without causing control loop overshoot. Feedback resolution is 8192 incr/rev, so the drive can close a fine position loop even at the 141 mm overall motor length. The sealed housing and light weight also support use on moving assemblies that benefit from low added mass and reliable position feedback.
