SR-L0.0004.060-00.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
50 Seconds
The Bosch Rexroth Indramat SR-L0.0004.060-00.000 is part of the SR Synchronous Servo Motors series and features an IM B5 mounting type with a motor length of 148 mm. This servo motor has a feedback type of resolver, a protection rating of IP67, and a rated speed of 6000 min^-1. It offers a standstill torque of 0.4 Nm and a noise level of 58 dB(A).
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR-L0.0004.060-00.000 is a synchronous servo motor built by Bosch Rexroth Indramat within the SR Synchronous Servo Motors series. The unit converts drive commands into precise rotary motion that can be closely regulated for speed and position, making it suitable for light pick-and-place actuators, labelers, and compact conveyor stations in automated machinery. Its sealed housing allows direct integration into washdown or dust-laden production areas without an additional enclosure. The compact design also supports installations where available machine space is limited.
At standstill, the motor develops 0.4 Nm of torque while drawing only 0.55 A, which helps limit heat generation in continuous-duty axes. The electromagnetic design provides a torque constant of 0.7 Nm/A, allowing the drive to calculate mechanical output from the commanded current. When motion is required, the rotor accelerates to a rated speed of 6000 rpm, supporting rapid indexing in short-stroke mechanisms. The housing has an IP67 ingress protection rating, providing protection against dust and temporary water immersion under the applicable test conditions. Installation uses an IM B5 flange for secure face mounting to the machine. A 9 × 20 mm keyway shaft with a feather key transfers torque directly to timing pulleys or couplings without requiring an adapter.
Dynamic behavior is supported by a rotor inertia of 0.14 × 10^-4 kg·m², permitting quick acceleration while helping the control loop maintain stable motion. The motor weighs 1.5 kg, allowing it to be installed on moving gantry arms without adding excessive load to the linear bearings. During operation, airborne sound is limited to 58 dB(A), keeping motor noise within typical levels for industrial machinery. The bearing design supports a minimum service life of 20,000 hours, which can reduce the required frequency of bearing maintenance. Resolver feedback supplies rotor position information to the connected drive for closed-loop regulation. The 148 mm housing length accommodates compact machine layouts, while resistance to mechanical shocks of up to 6 g supports operation in applications exposed to abrupt movement or impact.
