SR-L0.0002.060-00.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
48 Seconds
The Bosch Rexroth Indramat SR-L0.0002.060-00.000 is part of the SR Synchronous Servo Motors series and has a protection rating of IP67. This motor features a resolver feedback device and supports a DC link voltage of 670 V. It weighs 1.0 kg, has a rated speed of 6000 min^-1, and delivers a locked-rotor torque of 0.2 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR-L0.0002.060-00.000 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the SR Synchronous Servo Motors series. It is intended for compact automation axes where tightly regulated rotary motion, quick positioning, and precise speed control are required. Used with a matching drive controller, the unit converts DC-link power into controlled shaft output that can be coupled directly to miniature gearboxes, timing pulleys, or light-duty spindles in pick-and-place or dosing equipment.
The motor is powered from a DC link stabilized at 670 V, and its resolver feedback supplies the drive with accurate sine-cosine position signals for closed-loop current regulation. A square flange measuring 55 mm on each side simplifies mounting to standardized servo adapters. When the shaft is blocked, the winding draws only 0.45 A while producing 0.2 Nm of locked-rotor torque, which helps limit heat generation during clamped operation. Under rated load, the rotor reaches 6000 rpm, and the shaft size is suitable for small mechanical transmissions used on compact axes.
Overall mass is kept to 1.0 kg, and the stator body length is only 126 mm, which helps when space inside a tooling frame is constrained. The winding assembly is potted inside an IP67 housing so the unit can tolerate coolant spray and temporary immersion without additional covers. Rotor inertia remains low for fast acceleration, and the construction withstands shocks up to 6 g during rapid index moves. A torque constant of 0.44 Nm/A links commanded phase current directly to output torque, which helps the drive maintain stable regulation across variable loads.
