SR-A2.0026.030-10.000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
2 Seconds
The Bosch Rexroth Indramat SR-A2.0026.030-10.000 is part of the SR Synchronous Servo Motors series and features a resolver encoder type as well as an IM B5 construction. The motor weighs 6.2 kilograms, has a flange size of 100 mm, and a protection type of IP67. It offers a rated speed of 3000 min^-1 and a locked-rotor torque of 2.6 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SR-A2.0026.030-10.000 is a compact synchronous servo motor manufactured by Bosch Rexroth Indramat in the SR Synchronous Servo Motors series. It converts drive-controller commands into regulated torque and speed for medium-duty robotic joints, indexing tables, and feeder rolls. A B5 construction style allows direct flange mounting, letting the motor integrate easily into automation frames where repeatable rotary positioning is required. Its synchronous operating principle supports steady speed control and accurate response during frequent starts, stops, and direction changes.
During continuous operation, the rotor reaches a rated speed of 3000 rpm, allowing compatible servo drives to support fast positioning without requiring reduction gearing in every axis. The torque constant is 1.5 Nm/A, so each ampere delivered by the servo drive produces proportional shaft torque. At startup, the unit develops a locked-rotor torque of 2.6 Nm while the winding draws 1.7 A, which helps the drive react predictably during brief stall conditions. The motor has a flange dimension of 100 mm, providing a rigid mounting surface for gearboxes while keeping the assembly compact. A 14 mm diameter shaft extends 30 mm and uses standard keyways for secure power transfer. This layout supports direct coupling to pulleys, couplings, and small transmission stages.
System responsiveness is supported by a rotor inertia of 4 × 10⁻⁴ kg·m², which balances quick acceleration with smooth settling in high-cycle indexing routines. The enclosure is rated IP 67, permitting washdown cleaning and protecting the resolver, windings, and bearings from coolant splash and dust ingress. Axial loads up to 70 N can be applied through the shaft without exceeding bearing limits, which suits the motor for belt tensioners or vertical lead screws. With a total mass of 6.2 kg and an overall length of 208 mm, the unit adds only moderate static load to moving assemblies. The compact housing fits rotary and linear axes where installation space is limited.
