SG-B2.027.049-10.010 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat SG-B2.027.049-10.010 is a brushless servo motor in the SG Synchronous Servo Motors series with metallic construction and a flange size of 100 mm. It features a nominal speed of 4800 rpm, static torque of 2.6 Nm, and is protected to IP65 standards. The motor uses a resolver encoder for rotor orientation, has insulation class F, and operates without a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SG-B2.027.049-10.010 is a brushless servo motor produced by Bosch Rexroth Indramat within the SG Synchronous Servo Motors series. The metal stator housing allows direct frame grounding, while thermal radiation combined with natural convection removes heat without fans. A resolver mounted on the rotor supplies position feedback, and the motor can be installed in the IM B5 orientation with optional IM V1 or IM V3 mounting. This configuration provides automated machinery with precise closed-loop axis control for packaging, pick-and-place, or auxiliary spindle applications.
The rated standstill torque is 2.6 Nm, so the axis can hold or accelerate modest loads without gearbox multiplication. Under standstill conditions, the windings draw a current of 6.8 A; the drive amplifier must therefore supply this continuous phase current to maintain the rated torque. At the rated voltage, the rotor reaches a nominal speed of 4800 rpm, making the unit suitable for high-throughput positioning cycles. A flange diameter of 100 mm provides ISO-standard mounting geometry, and the enclosure has an IP65 protection rating that seals internal components against dust and water jets. Accuracy grade R on the flange face keeps the motor centerline concentric with the load. The 1.5 mm² mating connector cross section accommodates standard hybrid power and signal cables.
The electrical insulation meets the Class F temperature limit, allowing winding temperatures up to 155 °C when the ambient temperature remains within the range of 0 to 40 °C. Samarium-cobalt magnets identified as SmCo deliver stable magnetic flux at elevated temperatures, supporting consistent torque across operating cycles. A smooth shaft measuring 19 mm × 40 mm couples with clamp or collet hubs. The motor does not include a holding brake, so static loads must be secured by external means when power is removed. Cooling relies solely on thermal radiation and natural convection, so surface airflow must remain unobstructed when the motor is installed in an enclosed cabinet.
Frequently Asked Questions about SG-B2.027.049-10.010:
Q: What type of encoder is used on the SG-B2.027.049-10.010 servo motor?
A: The SG-B2.027.049-10.010 servo motor is equipped with a resolver for both rotor orientation and spindle speed feedback.
Q: What is the nominal speed of the SG-B2.027.049-10.010 servo motor?
A: The SG-B2.027.049-10.010 operates at a nominal speed of 4800 rpm.
Q: What is the protection category of the SG-B2.027.049-10.010 servo motor?
A: This model has a protection rating of IP 65, making it resistant to dust and water jets.
Q: What are the shaft dimensions and design of the SG-B2.027.049-10.010 servo motor?
A: The shaft of this motor is a smooth design with dimensions 19 mm diameter and 40 mm length.
Q: What magnet material is used in the SG-B2.027.049-10.010 servo motor?
A: It is built with SmCo (Samarium-Cobalt) magnet material for efficient operation.