Product Description:

The SG-B1.016.060-10.010 is a brushless servo motor produced by Bosch Rexroth Indramat as part of the SG Synchronous Servo Motors series. It converts controlled electrical power into precise rotary motion, allowing positioning tables, pick-and-place axes, and other automation modules to follow programmed speed and torque profiles. A resolver mounted on the shaft provides absolute rotor orientation for closed-loop control, allowing the connected drive to regulate position and speed.

This motor reaches a nominal speed of 6300 rpm, enabling fast cycle times with light-to-medium inertia loads. Continuous holding capability is supported by a static torque of 1.65 Nm, while momentary stall conditions draw a standstill current of 4.5 A. The magnetic circuit uses SmCo rare-earth material, providing stable flux density across a wide temperature range. The mechanical interface uses an IM B5 face-mount layout and centers on a 70 mm flange machined to accuracy grade R for repeatable alignment. The shaft measures 11 mm in diameter and 23 mm in length, and the power leads terminate in a mating connector sized for 1.5 mm² conductors. The metallic housing dissipates heat efficiently, while thermal radiation and natural convection remove losses without auxiliary fans.

The housing has an IP 65 protection rating, sealing it against dust and low-pressure water jets. The windings use insulation class F according to VDE 0530, supporting operation within an ambient temperature range of 0 to 40 °C. The output end uses a smooth shaft, simplifying direct coupling to friction clamps or precision collets. The IM V1 and IM V3 installation options permit vertical mounting without additional modifications. The motor is supplied without a holding brake, so external clamping or drive torque must secure stationary loads when power is removed.