Product Description:

The SG-B1.006.072-10.010 is a synchronous servo motor produced by Bosch Rexroth Indramat and included in the SG Synchronous Servo Motors series. It is intended for closed-loop axis control in automated assembly stations, pick-and-place gantries, and compact packaging lines where rapid acceleration and precise speed regulation are needed. When paired with a compatible drive, the unit translates electrical commands from the machine controller into controlled rotary motion for tooling, grippers, or conveyor elements. Its compact format makes it suitable for axes where installation space is limited but repeatable motion is still required.

The motor mounts to machine frames through a flange that measures 70 mm across and meets accuracy class R for concentric alignment with gearheads. A brushless resolver in the stator supplies rotor-angle feedback, letting the drive sustain 8800 rpm without position loss. At rest, the electromagnetic system provides 0.60 Nm while drawing 2.2 A, which helps limit heat during clamp cycles and short holding periods. The torque factor of 0.28 Nm/A shows how current is converted into torque during short overloads. Cabling is routed directly because the housing is supplied without a mating connector, allowing the connection layout to match the machine wiring path.

Dynamic behavior is influenced by a rotor inertia of 0.016 ×10⁻³ kg·m², so the axis accelerates quickly and settles with limited overshoot in high-speed indexing tasks. The overall body length of 115 mm permits installation in tight enclosures, and the aluminum frame weighs only 1.4 kg, which helps reduce the load on cantilevered axes and moving supports. An enclosure rating of IP 65 protects internal windings from airborne dust and low-pressure water jets when the motor is mounted near washdown zones or coolant spray. The resolver housing and shaft seals share the same protection class, so exposed interfaces maintain the same level of sealing during operation.