SG-A2.014.065-10.010 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat SG-A2.014.065-10.010 is a brushless servo motor from the SG Synchronous Servo Motors series. It features a nominal speed of 5800 rpm, a static torque of 1.3 Nm, and is designed with a smooth 19 mm by 40 mm shaft. The motor uses a resolver for rotor orientation, is protected to IP65, operates in ambient temperatures from 0 to 40 °C, and uses SmCo magnets with F insulation class.
Internal Product Review
The SG-A2.014.065-10.010 is a brushless servo motor that stands out for IP65 protection. Thermal radiation with natural convection cooling and resolver-based rotor orientation support stable, low-maintenance spindle performance. A nominal speed of 5800 rpm gives this motor a precise, high-response profile for demanding servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SG-A2.014.065-10.010 is a brushless servo motor manufactured by Bosch Rexroth Indramat for the SG Synchronous Servo Motors series. Built for closed-loop motion axes, the unit converts commanded drive current into precise rotary movement for positioning tooling, indexing tables, and feed rolls in automated equipment. Its resolver encoder supplies continuous rotor-angle feedback to the controller, supporting accurate velocity and position control in industrial automation cells.
The motor operates at a nominal speed of 5800 rpm when supplied with the appropriate voltage and frequency by a compatible drive. A static torque of 1.3 Nm is available at rest, allowing the axis to resist externally applied loads during dwell periods. To sustain that holding force, the windings draw a standstill current of 4.4 A, which the amplifier must provide without causing excessive heating. The rotor uses SmCo magnets that maintain flux density as temperatures rise and reduce the risk of demagnetization. Power reaches the load through a smooth shaft measuring 19 mm × 40 mm; its cylindrical surface accepts clamp or collet couplings and avoids keyway stress during high-speed operation.
The housing has an IP65 protection rating, preventing dust and water jets from entering the stator chamber. Standard mounting uses an IM B5 flange pattern, and vertical installation is permitted when the load is properly balanced. The flange has a diameter of 100 mm and is machined to Accuracy R tolerances for concentric alignment with gearboxes. The stator windings use Class F insulation, supporting operation within an ambient temperature range of 0 to 40 °C when heat is removed through thermal radiation and natural convection. A mating connector for 1.5 mm² conductors routes electrical power to the motor phases. The motor is supplied without a holding brake, so an external brake or another mechanical restraint is required to secure the load after drive power is removed.
