SG-A1.016.060-13.010 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The SG-A1.016.060-13.010 is a brushless servo motor manufactured by Bosch Rexroth Indramat as part of the SG Synchronous Servo Motors series. It features a nominal speed of 6300 rpm and a static torque of 1.65 Nm, with a smooth shaft measuring 11 mm in diameter and 23 mm in length. The motor includes a resolver for rotor orientation and spindle speed, has an IP65 protection rating, and operates within an ambient temperature range of 0 to 40 degrees Celsius.
Internal Product Review
The SG-A1.016.060-13.010 is a Bosch Rexroth Indramat brushless servo motor with a nominal speed of 6300 rpm. Resolver feedback for rotor orientation and spindle speed supports stable control, while IP65 protection suits demanding industrial installations. The integrated holding brake and 1.65 Nm static torque make the motor a dependable choice for precise servo axes.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SG-A1.016.060-13.010 is a brushless servo motor produced by Bosch Rexroth Indramat for the SG Synchronous Servo Motors series. The unit is a compact drive element for positioning axes, feed spindles, and other automated plant equipment. It supplies closed-loop rotary motion where precise speed and torque control are required.
At a nominal speed of 6300 rpm, the motor can sustain continuous rotation suitable for high-speed tool or spindle applications. Its static torque rating of 1.65 Nm supports holding the load when the energized shaft is motionless, preventing load slip during dwell periods. A standstill current of 4.5 A is drawn to maintain this torque, so the selected drive must support that continuous current even when no movement occurs. Heat produced under these conditions is released through thermal radiation and natural convection, eliminating the need for forced-air or liquid cooling. The housing has an IP 65 protection rating, sealing the stator and resolver against dust ingress and water jets encountered in typical factory environments.
The rotor uses SmCo permanent magnets, a material selected for high coercivity and temperature stability, allowing rated performance within an ambient temperature range of 0 to 40 °C without demagnetization. Electrical terminations are made through a mating connector that accepts conductors up to 1.5 mm², simplifying cable installation. Mounting follows the IM B5 pattern with optional vertical orientations. The motor has a flange diameter of 70 mm, and the flange is ground to Accuracy R for repeatable concentricity. The windings use Class F insulation according to VDE 0530, matching the thermal load of the integrated holding brake that secures the smooth, 11 mm diameter shaft when power is off. A rotor-mounted resolver supplies absolute position feedback, while the 23 mm shaft extension accommodates couplings without additional machining.
