Product Description:

The SF-L1.0023.060-10.050 is a servo motor produced by Bosch Rexroth Indramat within the SF Servo Motors series. It converts drive output from a matched controller into precise shaft rotation for positioning and speed control tasks in automated machinery, packaging stations, and assembly gantries. As an integrated electromechanical actuator, the unit supplies controlled torque while supporting the electrical feedback requirements common in industrial automation. This arrangement allows the motor and controller to operate as a closed-loop axis drive where repeatable motion and stable speed regulation are required.

At a rated shaft velocity of 6000 rpm, the motor can support high-cycle operations without exceeding its thermal envelope. The standstill torque of 2.3 Nm is the torque available when the rotor is stationary, and the torque constant of 0.73 Nm/A links output torque directly to phase current for drive tuning. An acoustic emission ceiling of 58 dB(A) helps limit plant noise, while the IP67 housing seals the motor against coolant spray and airborne particles. Heat is removed only by radiation and natural convection, so no external fan or coolant loop is required. Dual NTC thermistors provide internal temperature monitoring for controller derating during demanding duty cycles.

Mechanical integration is simplified by the IM B5 mounting pattern, a circular flange of 70 mm, and a case diameter of 77 mm, which allow installation on compact gear stages and machine faces. The output-side locating bearing arrangement maintains axial position during bidirectional thrust, helping preserve alignment under reversing loads. During installation, the motor withstands impacts up to 6 g without affecting rotor alignment. Continuous hold demands are served with a standstill phase current of 3.16 Arms for stable thermal loading. The compact housing also helps where mounting space is limited around couplings and adjacent components.