Product Description:

The SF-L1.0016.060-10.050 is a servo motor engineered by Bosch Rexroth Indramat for the SF Servo Motors series. It is built for closed-loop motion tasks where precise rotary movement must follow drive commands in pick-and-place modules, indexing tables, or light machine tools. A flange-mounted IM B5 construction lets the housing align directly to a driven shaft without intermediate brackets, which helps keep the mechanical stack short. An absolute encoder and sealed bearing sections provide position data to the drive while helping keep contaminants away from the interior.

The motor reaches a rated speed of 6000 rpm, allowing fast cycle times when paired with high-bandwidth controllers. A torque constant of 0.67 Nm/A gives the mechanical torque produced per ampere of phase current, which helps with loop tuning and current-limit calculations. During startup, the locked-rotor torque is 1.6 Nm and the locked-rotor current is 2.4 A, so these values help indicate the minimum inverter capacity needed for static load release. The DC link voltage rating of 670 V matches the intermediate circuit used in Bosch Rexroth multi-axis drives, allowing direct connection without step-down converters. Position feedback is delivered through an absolute encoder with 8 million increments per revolution, enabling very fine command resolution and repeatable positioning across the full revolution.

An enclosure rating of IP67 helps block dust ingress and water exposure, so the unit can operate near coolant spray or in areas that require routine washdown. The stator is designed to withstand an axial force of 33 N without overloading the bearings, which supports belt tension or light thrust loads imposed by couplings. Shock resistance of 6 g helps the motor tolerate vibration in demanding installations, and the noise emission is 58 dB(A) for relatively quiet operation. Encoder accuracy is specified at ±20 arcsec, and the minimum service life is 20,000 hours under rated conditions.