Product Description:

The SF-L1.0008.060-10.050 is a servo motor built by Bosch Rexroth Indramat within the SF Servo Motors series. As a rotary actuator for industrial automation, it converts controlled electrical energy into rotational motion that can be managed precisely by drive electronics. The unit is used where compact direct-drive torque and speed control are required, such as indexing tables or packaging axes, and it supports repeatable motion without the need for mechanical transmissions.

The motor is supplied from a DC bus of 670 V, which influences drive selection and the available back-EMF margin. Under rated conditions, it reaches 6000 rpm, allowing rapid cycle times in high-speed stations. Its electromagnetic design delivers a torque constant of 0.6 Nm/A, so drive current scales output torque in a predictable way for closed-loop control. The enclosure is rated IP67, which protects internal components against dust ingress and temporary immersion. Operation is permitted at ambient temperatures up to 40 °C without derating, and the motor can tolerate mechanical shocks up to 6 g during handling or machine impacts. Heat is removed through natural convection, so no external fan is required, while locked-rotor values of 0.8 Nm torque and 1.35 A current indicate the stall load that the drive must manage during startup.

An admissible axial load of 33 N can be applied to the shaft, which helps when matching the motor to belt or gear-driven arrangements. Cabling uses a 4 × 1.5 mm² lead set, and the IM B5 mounting style supports flange installation when space behind the motor is limited. Expected service availability is at least 20,000 hrs, which fits preventive maintenance intervals common in continuous-duty equipment. Acoustic output is limited to 58 dB(A), allowing the motor to operate near personnel without adding excessive noise to the surrounding machine area.