Product Description:

Bosch Rexroth Indramat manufactures the SF-L1.0008.060-00.000 within the SF Servo Motors series. This permanent-magnet servo motor provides closed-loop torque and position control for packaging stations, pick-and-place modules, indexing equipment, and other machines that need fast motion with repeatable accuracy. When connected to a digital drive controller, it can synchronize multiple axes and support direct-drive layouts that reduce the need for mechanical gearboxes. Its servo design is suited for applications that require precise starts, stops, and stable positioning during short, repeated cycles.

The motor reaches a rated mechanical speed of 6000 rpm, enabling high cycle rates when paired with matched drive electronics. At stall, phase current is limited to 1.1 A rms, which helps control rotor heating during low-speed operation. The housing is sealed to IP67, allowing use in washdown areas found in food or pharmaceutical equipment. The motor operates without forced-air cooling, so heat is transferred through the flange and machine frame instead of by an external fan. Position feedback comes from a single-turn absolute encoder, which provides shaft angle information immediately after power-up and removes the need for a homing move at startup.

The keyed shaft follows the DIN 6885 standard, so common couplings can be fitted without modification. At the mounting face, the motor uses flange precision N to maintain concentricity, and the rotor is held to balance quality N for smooth running during acceleration. Winding temperature is monitored by 2 NTC sensors embedded in the stator, giving the drive reliable thermal input for current limiting. A dry-running seal at the mounting face helps block contamination from entering the motor, while the shaft and flange arrangement supports accurate alignment in compact machine assemblies.