SF-A5.0700.030-10.050 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 1070076574
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat SF-A5.0700.030-10.050 is a servo motor from the SF Servo Motors series with a 190 mm flange size and a smooth shaft style. It features an absolute encoder feedback type, delivers a rated speed of 3000 rpm, and has a locked-rotor torque of 69 Nm. The servo motor offers a locked-rotor current of 45 Amps and a rotor inertia of 0.0257 kg·m².
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SF-A5.0700.030-10.050 servo motor is produced by Bosch Rexroth Indramat within the SF Servo Motors series. It provides closed-loop rotational power for automated handling units, gantries, and packaging stations where precise motion and repeatable torque are mandatory. By combining permanent-magnet excitation with electronic feedback, this unit serves as an electromechanical actuator that converts drive commands from the servo amplifier into controlled shaft movement required by industrial machinery. This arrangement supports accurate speed regulation and stable positioning during repetitive motion cycles.
The motor mounts to a machine frame by means of a square flange that measures 190 mm across, giving a standardized interface for rigid alignment with gearboxes or direct-drive couplings. The square mounting face helps keep the motor centered during installation and supports consistent coupling alignment. Under rated conditions, the shaft turns at 3000 rpm, a speed used for synchronous operation with Rexroth drive controllers. Its electromagnetic design has a torque constant of 1.53 Nm/A, so drive sizing can be calculated directly from commanded current. When the rotor is blocked, the stator can produce a holding torque of 69 Nm while the winding draws up to 45 A(rms). Position information is returned to the controller through an integrated absolute encoder, enabling single-turn accuracy without battery-backed homing routines. The encoder also lets the controller monitor rotor position continuously during operation.
Dynamic response is influenced by the rotor’s mass moment of inertia, specified at 0.0257 kg·m²; this relatively low value supports rapid acceleration without excessive drive current. The shaft end is supplied as a smooth shaft, allowing press-fit couplings or friction clamping hubs without keyway stress concentrations. The motor is supplied without a mating connector, so installation requires a user-supplied plug that matches the Rexroth pin layout. This arrangement allows the cable connection to be selected for the required routing and enclosure layout.
Frequently Asked Questions about SF-A5.0700.030-10.050:
Q: What type of feedback does the SF-A5.0700.030-10.050 servo motor utilize?
A: The SF-A5.0700.030-10.050 motor features an absolute encoder for feedback.
Q: What is the flange size of the SF-A5.0700.030-10.050 motor?
A: This model has a flange size of 190 mm for secure mounting.
Q: What locked-rotor torque does the SF-A5.0700.030-10.050 deliver?
A: The SF-A5.0700.030-10.050 provides a locked-rotor torque of 69 Nm, supporting demanding mechanical loads.
Q: What is the rated speed of the SF-A5.0700.030-10.050 servo motor?
A: The rated speed for this servo motor is 3000 min⁻¹.
Q: What shaft style does the SF-A5.0700.030-10.050 servo motor have?
A: This model is built with a smooth shaft design, enabling precise and low-vibration operation.
