SF-A5.0700.020-10.101 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 1070076617
The Bosch Rexroth Indramat SF-A5.0700.020-10.101 is a servo motor with a flange size of 190 mm and a total mass of 50 kilograms. Part of the SF Servo Motors series, it features an absolute encoder, a rated speed of 2000 min-1, and IP67 protection. The motor has a locked-rotor current of 34 Amps, a locked-rotor torque of 69 Newton-meters, and measures 483 mm in length.
Internal Product Review
The SF-A5.0700.020-10.101 is a Bosch Rexroth Indramat SF servo motor with an absolute encoder and IP67 protection. Rated speed of 2000 min-1 and locked-rotor torque of 69 Nm support strong motion performance in demanding servo applications. The oil-running-tight output flange is a standout feature for sealed machine environments.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SF-A5.0700.020-10.101 is a servo motor produced by Bosch Rexroth Indramat as part of the SF Servo Motors series. It serves as a precision actuator for industrial automation, delivering closed-loop rotary motion wherever coordinated velocity and position control are required. An absolute encoder enables immediate feedback after power-up, while the oil-running-tight output flange lets the shaft couple directly to lubricated gear stages. Because no mating connector is supplied, field-wired plugs must match the drive cabling.
The mechanical interface uses a flange diameter of 190 mm, giving a standardized mounting face for gearboxes and machine frames. When stalled, the winding can draw up to 34 A, and under that same locked-rotor condition the motor can deliver 69 Nm of torque for short periods such as clamp engagement. During continuous motion, the motor has a torque constant of 2.0 Nm/A, so the controller can predict output torque directly from phase current. Rated operation is set at 2000 rpm, balancing thermal loading with speed demands on conveyor or spindle axes. A maximum oil pressure of 1 bar is permissible at the shaft seal, and the total motor length of 483 mm must be accommodated inside the machine enclosure.
The motor has a mass of 50 kg, which affects gantry counterweight sizing and load inertia matching. The housing carries a protection level of IP67, allowing washdown cleaning or brief immersion without compromising the internal windings. Dynamic response is aided by a rotor inertia of 257 × 10⁻⁴ kg·m², giving predictable acceleration profiles when paired with proper drive tuning. Power is transmitted through a shaft that measures Ø32 × 58 mm, and the motor may operate with the output flange under light lubrication pressure while avoiding higher hydraulic forces.
