Product Description:

The Bosch Rexroth Indramat SF-A4.0230.030-00.043 belongs to the SF Servo Motors series and functions as a precision rotary actuator for industrial automation platforms that require accurate velocity and position control. When paired with a suitable drive, it supports closed-loop motion on indexing tables, pick-and-place heads, and synchronized conveyor sections on automated lines. Its servo design is suited to applications that need repeatable positioning and stable speed regulation during continuous machine operation.

The electromagnetic package is optimized for dynamic response. Its rated shaft speed reaches 3000 rpm, and the winding can deliver a sustained stall output of 23 Nm while drawing a standstill current of 16.2 A. A torque constant of 1.57 Nm/A relates drive current to produced torque, which helps keep servo tuning straightforward. Mechanical resilience is supported by a shock tolerance of 6 g, so the rotor and bearings can withstand rapid deceleration and transport impact. The motor uses a keyed shaft that follows DIN 748 to transmit load without slip, while the mating power and feedback connector is size 1.0 and axial alignment is guided by a Ø130 j6 pilot on the front housing.

Integration with machinery frames is handled through a 142 mm square flange built to IEC 72-2 / DIN 42948 and a base-mount interface of IM B5, allowing face mounting to gearboxes or adapter plates. In operation, the acoustic pressure remains at 58 dB(A), which helps in installations where several motors run close together. Internal thermal supervision relies on 2 NTC sensors that send winding temperature data to the drive so thermal loading can be monitored during operation. This arrangement helps the control system respond to rising motor temperature before insulation stress becomes excessive.