SF-A3.0093.060-10.015 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 1070076593
The Bosch Rexroth Indramat SF-A3.0093.060-10.015 is part of the SF Servo Motors series and has a rated speed of 6000 min^-1 and a locked-rotor torque of 9.1 Nm. This motor weighs 12 kilograms, features a flange size of 116 mm, and has a DC link voltage of 670 V. It also comes with two NTC temperature sensors and a shaft measuring 19 mm in diameter and 40 mm in length.
Internal Product Review
The SF-A3.0093.060-10.015 is a Bosch Rexroth Indramat SF servo motor built for high-speed motion systems, with a rated speed of 6000 min^-1 and a 670 V DC link voltage. A torque constant of 0.67 Nm/A and locked-rotor torque of 9.1 Nm support responsive torque output and confident load handling. Dual NTC temperature sensors add valuable thermal protection, making this servo motor a strong option for precise industrial axis control.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SF-A3.0093.060-10.015 brushless servo motor is manufactured by Bosch Rexroth Indramat and belongs to the SF Servo Motors series. This three-phase unit is intended for closed-loop positioning tasks in industrial automation such as pick-and-place gantries, tool changers, and feed drives. When paired with a matching drive controller, it delivers repeatable motion and supplies the mechanical power needed to accelerate loads in compact machine layouts. Its permanent-magnet rotor and integral feedback help the drive maintain synchronization during rapid speed changes and short positioning moves. That combination is useful on axes that reverse often and must settle quickly after each move.
Incoming power is supplied from a DC bus of 670 V, allowing the motor to reach high speed without excessive current demand. At standstill, the windings can draw 13.5 A of locked-rotor current, and under that condition the shaft produces 9.1 Nm of torque for holding or clamping duties. Dynamic response is supported by a combined rotor and encoder inertia of 0.0016 kg·m², which helps the axis accelerate quickly with limited overshoot during short indexing moves. The motor uses a 116 mm square flange pattern for mounting to common machine frames, and that layout supports straightforward alignment with couplings and adjacent hardware. A torque constant of 0.67 Nm/A links commanded current to delivered torque, making current-loop behavior easier to predict.
The housing mass of 12 kg keeps the center of gravity near the mounting face, which can reduce bending load when the motor is cantilevered. Overall body length measures 287 mm, giving the unit a slim profile for multi-axis machines where installation space is limited. During normal operation, the rotor sustains speeds up to 6000 rpm, providing a wide operating range for fast servo applications and quick traverse motions. The output shaft has a diameter and length of 19 mm x 40 mm, supporting keyed hubs or precision couplings used on compact drive trains. Two embedded NTC sensors report winding temperature so the drive can reduce current before overheating occurs during repeated cycles or extended holding periods.
