Product Description:

The SF-A2.0026.030-00.058 is a servo motor in the SF Servo Motors series. It is intended for closed-loop motion axes where accurate positioning and velocity control are required in industrial automation cells, material-handling stations, or pick-and-place gantries. By translating electrical drive commands into controlled mechanical rotation, the unit forms the electromechanical interface between a drive controller and the driven load. This makes it suitable for applications that need repeatable starts, stops, and speed changes under automatic control.

The motor sustains a rated shaft velocity of 3000 rpm, enabling direct coupling to gearboxes or belt systems used on medium-speed production lines. During a stall condition, it can deliver up to 2.6 Nm of locked-rotor torque while drawing a locked-rotor current of 1.7 A. These values indicate the breakaway torque available at startup and the current the inverter must supply to begin motion. The motor has an IP67 enclosure, so it keeps out dust and tolerates temporary water immersion in washdown or coolant-laden areas. Machine integration is simplified by the IM B5 flange configuration, which mounts the stator face to a plate and lets the shaft project forward for coupling.

A rotor inertia of 4 × 10^-4 kg·m² balances quick acceleration with stable speed regulation, helping the drive respond cleanly with light to moderate loads. The housing and internal components withstand repetitive impacts up to 6 g, which helps the motor remain aligned on axes exposed to abrupt tooling changes or hard stops. A torque constant of 1.5 Nm/A links commanded current to output torque, allowing predictable current-to-torque conversion during profiling. This relationship helps the controller adjust output smoothly when load demand changes during a motion cycle.