Product Description:

The SF-A2.0013.060-00.050 is a servo motor produced by Bosch Rexroth Indramat within the SF Servo Motors series. As an electromechanical drive element, it converts electrical power from a compatible servo inverter into rotary motion for positioning, speed, and torque tasks in automated machinery. When paired with the appropriate digital drive controller, the motor supports closed-loop motion on pick-and-place units, packaging equipment, and other industrial axes that require stable response during repeated cycles. Its compact servo design makes it suitable for applications where accurate movement and predictable motor behavior are important to machine performance.

Thermal management relies on natural convection, so heat dissipates through the housing without active airflow or liquid circuits. The motor is designed for a DC bus of 670 V, matching the high-voltage link used by compatible Rexroth servo amplifiers. A square flange measuring 100 mm provides standardized B5 face mounting and straightforward coupling to gearboxes or machine frames. During startup or blockage, the winding draws a locked-rotor current of 1.7 A, which produces a stall torque of 1.3 Nm for short-term load holding before rotation begins. Acoustic emission remains at 58 dB(A), which helps keep surrounding machine operation relatively quiet in enclosed production areas.

The motor reaches a rated speed of 6000 rpm, allowing rapid indexing where high throughput is needed. The assembly withstands mechanical shocks up to 6 g, helping it remain suitable for equipment exposed to abrupt impacts or fast machine transitions. Winding temperature is monitored by 2 NTC thermistors that send status data to the drive, allowing protective response before insulation limits are exceeded. With a torque constant of 0.76 Nm/A, the controller can relate motor current to output torque with a consistent current-to-torque relationship. The IM B5 construction type supports axial alignment with connected mechanical components and fits common face-mounted servo installations.