SD-LB3.095.060-10.037 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The SD-LB3.095.060-10.037 motor offers a voltage requirement of 460 Vrms operational, a forced cooling system with axial fans, speed regulation of >1:10,000, and operates within a temperature range of 0°C to +55°C. Part of the SD Magnet Motors series by Bosch Rexroth Indramat, it features IP00 protection.
Internal Product Review
The SD-LB3.095.060-10.037 servo motor by Bosch Rexroth offers exceptional durability and dynamic performance. It has a 2048-pulse encoder, 24V holding brake, and up to 15 Nm peak torque. This motor ensures efficient speed control and vertical load management under IP67-rated housing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth produces the SD-LB3.095.060-10.037 as a permanent brushless servo motor. This servo motor exists within the SD Magnet Motors Series. It features renowned qualities for precise control and durability in industrial automation. The servo motor uses high-energy rare earth magnets for permanent excitation.
The SD-LB3.095.060-10.037 servomotor has IP67 protection standards. It manages dust intrusion fully and operates underwater at depths below 1 meter. The product meets the standards of IEC34/VDE 0530 for global reliability in operation. The insulation rate is set to Class F among its technical features. The servomotor also permits operation at temperatures between 155°C and higher. This motor reaches its maximum 6000 RPM rotational speed boundary, which enables fast high-speed operations. The SD-LB3.095.060-10.037 servomotor produces 9.5 Nm as its rated torque, yet it can reach 15.0 Nm as peak torque. Speed feedback from the tacho operates by delivering a voltage of 1.8 V with each 1000 revolutions. The servo motor has a holding brake feature activated by 24V power. This provides better control capabilities for vertical operations and load support. A Heidenheim ROD 456 rotary encoder functions as the integrated unit. It delivers up to 2048 position values during one revolution while operating at 5V DC. 5V DC power. This provides accurate position reading and speed tracking capability. The electrical system connects through a 17-pin signal with a 7-pin power connector.
The SD-LB3.095.060-10.037 servomotor provides efficient operation within an ambient temperature range from 0°C up to 45°C. A humidity level of 90% will not lead to condensation on the motor. The product operates successfully at altitudes below 1000 meters above sea level. It can withstand movements exceeding 2g as well as impacts exceeding 15g. For industrial areas with harsh conditions, the motor features protective housing that enables it to run continuously without interruption.
