Product Description:

The SD-B3.095.030-00.000 is a magnet motor manufactured by Bosch Rexroth Indramat within the SD Magnet Motors series. It serves as a rotary actuator for industrial automation, converting electrical power from a matching drive into mechanical rotation for positioning, indexing, or continuous-duty motion on packaging, printing, and material-handling equipment. The motor is intended for closed-loop operation, so it can respond to commanded speed and position changes with stable servo behavior. In automated lines, that role supports repeatable starts, stops, and speed changes without relying on a separate mechanical indexing unit.

This unit is classified as a brushless servo motor, so electronic commutation eliminates brush wear and supports cleaner feedback signals for control. It has a nominal speed of 3000 rpm, which is its rated operating speed under the specified electrical conditions. At standstill, the rotor can produce 9.5 Nm of torque, allowing the axis to resist load movement while current is applied and commanded motion is zero. Magnetic flux is produced by Ferrite permanent magnets, which resist demagnetization at moderate operating temperatures. That operating profile is useful for servo applications that alternate between motion and short holding periods throughout a work cycle.

The motor uses a mounting flange that measures 116 mm across, providing a standardized interface for direct attachment to gearboxes or machine frames. Power is transmitted through a shaft with keyway and feather key, which gives the coupling a positive mechanical drive. The shaft size is 19 × 40 mm, balancing torsional strength with a compact footprint. This arrangement is useful for couplings, timing-belt pulleys, and similar drive elements that must stay locked to the shaft under reversing loads. The motor follows common mounting and wiring conventions used within the series, which helps it fit established motion systems without extra mechanical changes.