S20-DO-32/1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911172535
The S20-DO-32/1 digital output module features 32 channels, each with a maximum output current of 0.5A, an operating temperature range of -25 degrees C to +60 degrees C, and short-circuit and overload protection. Part of the S20 IndraControl Modules from Bosch Rexroth Indramat, it supports DIN rail mounting and operates at 24 V DC.
Internal Product Review
The S20-DO-32/1 offers reliable output handling with 8 A total current and up to 240 W of power utilization. Its 150 us signal delay ensures fast response in automation environments. Reverse voltage protection and local bus communication enhance system integrity. Ideal for high-density digital output configurations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The S20-DO-32/1 is a digital module developed by Indramat Rexroth with 32 digital outputs using push-in 1-wire connection technology. It features automatic restart after overload shutdown and possess a minimum load impedance of 10 k?. This module supports ohmic loads up to 12 W at 48 ? and it includes an electronic overload as well as short-circuit protection.
The S20-DO-32/1 controller provides a nominal output voltage of 24 V DC and 500 mA of peak current at the output terminals. The total device output current is 8 A and it uses an external fuse to ensure proper protection. The S20 controller's inductive loads can reach 12 VA at 1.2 H and for lamp loads, the maximum support is 12 W. The output switching frequency for ohmic loads is 5500 Hz and when outputs are switched off, the voltage is below 1 V. It has a signal delay of 150 us ON and 200 us OFF. Reverse voltage protection is available up to 0.5 A for 1 second and its internal power loss is 1.5 W under full load. The S20 controller performs communication via a local bus with a speed of 100 Mbit/s and the bus voltage is 5 VDC with a current draw of 120 mA. Its parameterization and configuration require 1 Byte and 6 Bytes respectively. The module's protection class is
and it can be mounted in any position.
The S20-DO-32/1 controller utilizes up to 240 W power and it includes diagnostic feature for indicating each output through its red and yellow LED lights. Its humidity support ranges from 5% to 95% non-condensing and it tolerates air pressure between 70 kPa to 106 kPa. The S20 controller weighs 191g combined with all the attached components and it dimensional measure is 53.6 x 126.1 x 54 mm (W x H x D).
