RZC01.1-5T-018-F-23 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911200950
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RZC01.1-5T-018-F-23 is a chemistry module from the RZC Chemistry Modules series with a rated power of 15 kW and a rated current of 24 Amps. It is designed for cabinet mounting, features a protection class of IP23, and can handle a maximum output frequency of 100 Hz. The module operates at a nominal voltage of 3 x AC 500 V ±10% and includes a NAMUR-terminal strip along with external 24 V standby power.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RZC01.1-5T-018-F-23 is classified by Bosch Rexroth Indramat as a Chemistry Module in the RZC Chemistry Modules series. It is supplied for integration into automated processing cabinets where chemistry-related power conditioning and control points are centralized within an overall drive system. The module occupies a single size class slot and connects to adjacent drive or I/O hardware through standardized backplane interfaces so that chemical dispensing, reaction, or measurement stages can be supervised by the main controller without separate field enclosures.
The module operates from a three-phase input of 3 × AC 500 V ±10 % and delivers a continuous line current of 24 A to downstream components. Its power section is rated for up to 15 kW of load, while the output frequency is limited to 100 Hz, aligning the drive signals with typical pump or agitator demands in chemical plants. A protection category of IP23 permits cabinet mounting in indoor industrial areas where falling liquids or direct sprays are not present. Because the housing is prepared for cabinet mounting, heat is dissipated through forced air inside the equipment bay rather than through an external finned surface, and the module maintains clearance for vertical airflow channels above the bus connections.
Two auxiliary features extend its functional scope: the electronics can be kept active by an independent external 24 V standby power source, and a dedicated circuit is provided to filter current feedback from connected drives, improving measurement stability during low-speed operation. Field terminations are grouped on a NAMUR terminal strip, which simplifies wiring for intrinsically safe loop devices often used on chemical dosing skids. With a Size Class B footprint, the unit follows design 1, line 1 dimensions, allowing consistent cabinet layouts across multiple processing lines without custom bracketry or busbar offsets.
Frequently Asked Questions about RZC01.1-5T-018-F-23:
Q: What is the maximum output frequency of the RZC01.1-5T-018-F-23 module?
A: The RZC01.1-5T-018-F-23 is rated for a maximum output frequency of 100 Hz.
Q: What is the rated current supported by the RZC01.1-5T-018-F-23 module?
A: This module has a rated current of 24 A, allowing it to deliver substantial power output.
Q: What nominal voltage does the RZC01.1-5T-018-F-23 operate with?
A: It supports a nominal voltage of 3 x AC 500 V, ±10%, making it suitable for high voltage systems.
Q: How is the RZC01.1-5T-018-F-23 module intended to be mounted?
A: The RZC01.1-5T-018-F-23 is designed for cabinet mounting to support secure and organized installations.
Q: What protection class does the RZC01.1-5T-018-F-23 have?
A: This module is built with an IP23 protection class, offering limited protection against spraying water and solid objects larger than 12.5 mm.
