Product Description

The RD52.1-4N-110-L-NN-FW vector control offered by Bosch Rexroth can be fitted with a RS 232 serial interface at its X11 connector to connect a PC or a user panel. The control is intended to function at a maximum elevation of 1,000m above sea level. The product may get damaged because of the incorrect supply voltage. The supply voltage of this device is switched by using the S5 jumper that is present on its logic and control board. The unit has a direct connection between its protective earth and reference ground. Its X14 connector has a standard terminal strip with five digital inputs and three digital outputs.

The vector control is connected to the associated motor through its U2, V2 and W2 terminals. The product comes with the ability to be connected to a standby 24V power supply by means of a plug connector with two poles. The device has the capability of implementing a starting lockout mechanism with its X80 connector through a plug-in connection. The unit is fitted with a gL type 250A series fuse. It also has a high current bushing terminal for its DC link connection. The control has a steel plate lug with an M8 size captive nut and 12Nm tightening torque for its protective conductor connection.

The product comes with a removable user panel that supports the copy function. The device also depicts Synchrolink or peer-to-peer coupling for rapid communication among multiple drives. The unit incorporates 170% overload capability for one second. It portrays 0.3ms torque rise time and 0.1ms current cycle time. This control is immune to noise in accordance with EN 50082-2 specifications. The product must have a humidity of not more than 90% when it is in use. This device storage must always be done between -25°C and 70°C. The control is available with warranty support for one year and shipped through well-known freight carriers with a worldwide presence.