RME12.2-32-DC024

Product Description:

The RME12.2-32-DC024 relay unit from the RECO Drive Modules series by Bosch Rexroth Indramat is built for switching operations in automation cabinets where reliable control matters. This is a standard electromechanical relay type module that fits directly onto a DIN rail for simple installation. With a slim profile measuring just 12.5 mm wide, it’s compact enough to slot alongside multiple units without cluttering the panel. The relay supports a 2 changeover DPDT contact configuration, designed to handle more flexible circuit arrangements in systems that require dual switching paths.

Rated with a coil voltage of 24 V DC, this model pulls in cleanly at around 18 VDC and drops out near 2.4 VDC. Coil resistance sits at approximately 650 Ohm, with a power draw that stays low — around 0.9 W — which makes it energy-efficient across extended use. Its contacts are built to switch loads up to 10 A at 250VAC or 30VDC, giving it the right capacity for medium-duty control setups. Dielectric strength is measured at 4000 Vrms between coil and contact, offering solid electrical separation, and insulation resistance exceeds 100 MΩ at 500 VDC, which helps with long-term operational stability.

Temperature tolerance ranges wide — from -40°C to +70°C — so this relay can be used in both cold warehouse floors and hot enclosures without issue. Mechanical movement is consistent, and contact chatter stays minimal under rated loads. The RME12.2-32-DC024 serves well in both switching logic and output control roles, particularly in tightly packed automation boxes. Wiring terminals stay accessible once mounted, making service quick. The slim build, combined with dependable ratings and simple coil response, makes this a go-to relay module in industrial electrical systems where space, temperature, and switching clarity all matter.