RME02.2-32-DC024-050 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
3 Seconds
The Bosch Rexroth Indramat RME02.2-32-DC024-050 is part of the RECO Drive Modules series and serves as an input module with 32 total inputs and 4 isolated groups. It operates at 24 VDC input voltage, has 4 connectors, and weighs 300 grams. The module measures 41.3 x 192 x 81 millimeters and has an overall height of 214 millimeters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the RME02.2-32-DC024-050 for use in the RECO Drive Modules series. Mounted on the common RECO rail, this plug-in board serves as an interface that routes field-level switch or sensor states into the drive or PLC rack, allowing central logic to monitor machine guards, actuator limits, and process contacts in real time. Its task is limited to digital acquisition, so it contains no output drivers or analog conversion stages, which keeps installation simple and minimizes heat inside the cabinet.
The board accepts 32 discrete lines that are internally arranged as 4 × 8 input groups. Each channel is referenced to the system’s nominal control voltage of 24 VDC, which avoids the need for individual resistors or scaling networks on the machine wiring harness. A high state draws less than 10 mA, so proximity switches and relay contacts are not burdened by excessive sink current. Signal integrity is maintained by dividing the card into 4 isolated groups, which helps prevent cross-coupled noise when different machine sections share the same backplane while operating from separate supply domains.
The mechanical outline measures 41.3 × 192 × 81 mm, while the carrier frame’s tallest point, including the extraction handle, reaches 214 mm. With a mass of only 300 g, the module places negligible stress on edge connectors and permits high-density stacking inside compact control enclosures. Four keyed ribbon connectors on the front panel link the backplane traces to field terminal blocks, allowing quick replacement without reterminating cables. Classified by the manufacturer as an industrial Input Module, the unit follows the same slot coding and diagnostic LED scheme used by neighboring RECO components, simplifying spare parts management across multi-station automation lines.
Frequently Asked Questions about RME02.2-32-DC024-050:
Q: How many inputs can be connected to the RME02.2-32-DC024-050 module?
A: The RME02.2-32-DC024-050 module supports up to 32 inputs, organized into 4 groups of 8 inputs each.
Q: What input voltage does the RME02.2-32-DC024-050 require?
A: The input voltage required for this module is 24 VDC.
Q: How many isolated groups are present in the RME02.2-32-DC024-050 module?
A: There are 4 electrically isolated groups on this input module.
Q: How many connectors are available on the RME02.2-32-DC024-050 module?
A: This module offers 4 connectors for wiring and integration.
Q: What is the input current for each channel on the RME02.2-32-DC024-050?
A: The input current per channel is less than 10 mA for high-level signals.
