RMA02.1-16-AC230-200 Bosch Rexroth Indramat
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
28 Seconds
The Bosch Rexroth Indramat RMA02.1-16-AC230-200 is an output module from the RECO Drive Modules series, featuring digital I/O with 16 outputs grouped in two sets of eight. Its active 1 switching mode supports a peak switching current of 2.0 Amps at an operating voltage of AC 230 Volts, and it weighs 600 grams.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the RMA02.1-16-AC230-200 output card for the RECO Drive Modules series. The board occupies one slot in a RECO rack and provides an electrical interface between the central controller and field devices. This layout helps centralize wiring inside modular drive cabinets where several function cards share the same backplane. In an automation line, it delivers discrete signals that actuate contactors, solenoid valves, or indicator lamps, linking higher-level logic to plant hardware during normal machine operation. Its solid-state outputs isolate controller electronics from the 230-volt control circuit, protecting sensitive processors from electrical noise and surge energy.
The card belongs to the Digital I/O class, meaning every channel processes binary states rather than analog levels. As an Output Module, it only sends signals and does not read them, so diagnostics must be handled upstream by the control system. A channel count of 16 lets a single module drive a modest machine section without additional expansion. Each channel is energized when the incoming line reaches AC 230 V, aligning the module with standard mains control voltage used in many industrial panels. During switching, each output can deliver up to 2.0 A, permitting direct operation of small actuators without auxiliary relays.
The terminals are arranged in two groups of 2 × 8, so wiring can be divided across separate harnesses. This arrangement helps keep terminal assignments organized when outputs are routed to separate machine sections. Signal transistors follow the Active 1 Switching convention, so the load is connected between the module and neutral while the card sources current on command. Continuous internal dissipation is limited to 12.8 W, which must be considered when calculating cabinet airflow for multiple cards operating at the same time. The assembled hardware mass of 600 g keeps the module light enough for easy handling while maintaining stable mounting in a vibration-prone panel.
Frequently Asked Questions about RMA02.1-16-AC230-200:
Q: What is the main function of the RMA02.1-16-AC230-200 module?
A: The RMA02.1-16-AC230-200 is designed as an output module for signal distribution.
Q: How many outputs are available on the RMA02.1-16-AC230-200?
A: This module provides 16 digital outputs for control applications.
Q: How are the outputs organized on the RMA02.1-16-AC230-200 module?
A: The outputs on this module are grouped in two blocks of 8.
Q: What is the peak switching current for each output on this module?
A: The RMA02.1-16-AC230-200 supports a peak switching current of 2.0 A per output.
Q: What turn-on voltage does the RMA02.1-16-AC230-200 require?
A: The required turn-on voltage for this module is AC 230 V.