RECO RME12.2-32-DC024 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911280939
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RECO RME12.2-32-DC024 is a drive module from the RECO Drive Modules series with 32 inputs arranged into 4 groups, and each connector has 9 pins. It supports a 24 VDC input voltage with a 32-bit data width, and has dimensions of 41.3 by 192 by 81 mm. This module weighs 300 grams and consumes a high input current of less than 10 mA.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RECO RME12.2-32-DC024 input module is produced by Bosch Rexroth Indramat and belongs to the RECO Drive Modules series. Designed for DIN-rail installation next to Rexroth drives and controllers, the unit accepts parallel field signals and forwards them to the system back-plane. By concentrating 24-volt logic inputs in a compact housing, it lets an automation cell collect switch, sensor, and interlock states without dedicating separate control board space. In conveyor lines, presses, or packaging machines, the module’s purpose is to bridge discrete devices and the controller that coordinates motion.
Internally the board presents a data path that is 32 bits wide, so an entire scan transfers all 32 input channels at once to the main processor. Each channel is referenced to a nominal 24 VDC supply, with a guaranteed logic-high threshold of +17 V and a logic-low ceiling of +8 V. This voltage window matches typical PNP proximity sensors and mechanical contacts used in industrial panels. Four input groups of eight points each share common return lines, limiting crosstalk and easing field wiring. Cabinet load is kept low because the finished module weighs only 300 g.
The housing measures 41.3 × 192 × 81 mm, so the footprint aligns with standard 192 mm RECO racks while leaving clearance for airflow between modules. Field harnesses land on 4 front-edge connectors, and each connector carries 9 pins to handle eight signal wires plus the shared reference. When a sensor is energized, its corresponding channel sources less than 10 mA, a current draw that supports long cable runs without voltage drop. By combining these electrical limits with the modular connector scheme, the unit completes a dense 32-point input layer that can be swapped or expanded without disturbing adjacent drive electronics.
Frequently Asked Questions about RECO RME12.2-32-DC024:
Q: How many inputs are available on the RECO RME12.2-32-DC024 module?
A: The RECO RME12.2-32-DC024 module supports 32 individual inputs for signal processing.
Q: What input voltage is required for each channel on the RECO RME12.2-32-DC024?
A: Each input of the RECO RME12.2-32-DC024 requires a nominal voltage of 24 VDC for operation.
Q: How many connectors are present and how many pins does each connector have on the RECO RME12.2-32-DC024?
A: This module uses four connectors, each supporting up to 9 pins for input signal connections.
Q: What is the highest input current supported by the RECO RME12.2-32-DC024 module?
A: The RECO RME12.2-32-DC024 accepts a maximum input current of less than 10 mA per input.
Q: How are the inputs on the RECO RME12.2-32-DC024 module grouped?
A: This model organizes its 32 inputs into 4 groups, with each group containing 8 inputs.
