COVID-19 Update: Wake Industrial is open and available to support your automation needs.
Innovators and engineers agree that Rexroth Bosch is among the few manufacturers that have a good understanding of the machine challenges faced by users and designers. They, in turn, design, manufacture, and test all motion control aftermarket accessories to make sure they have the right features and are designed to address all the machine challenges effectively and efficiently. The skilled and experienced manpower also ensure that the automation accessories are future proof, scalable, customizable and innovative. Whether you are looking for servo drives, permanent magnetic motors, low inertia motors, supply modules, power cables or even drive controllers, Rexroth Bosch has them.
Rexroth Bosch’s RECO-PC-104 N1 LK NSW01 PC component requires a certain environment for optimal performance. This component’s housing dimensions are 161 mm high, 60mm wide and 44.5 mm deep. The recommended relative humidity during its operation is 95% and it weighs about 310g. Its sensor connection type is 2-, 3-, or 4-wire technology and it has data operation with 8 bits operating mode. The degree of protection is either IP 65 or IP 67 as per the IEC 60529 and falls under class 3 of protection according to the VDE 0106, IEC 60536.
Now to the ambient conditions, the appropriate temperature for storing or transporting the RECO-PC-104 N1 LK NSW01 PC component is -25 °C to +85 °C. When operating this PC component, the ambient temperature should be -25 °C to +60 °C. The permissible air pressure during operation is 80 to 106 kPa up to 2000 meters above sea level. If transporting or storing, you should maintain the air pressure levels at 70 - 106 kPa up to 3000 MSL.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved