RECO MTS-R02.1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911279007
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat RECO MTS-R02.1 is part of the RECO Drive Modules series, featuring RS232, RS422, and RS485 communication and programming interfaces. It has a supply voltage of 24 VDC, a maximum current consumption of 0.7 A, and uses two rack slots. This module has an IP20 protection rating and weighs 1.65 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The RECO MTS-R02.1 module is produced by Bosch Rexroth Indramat as part of the RECO Drive Modules series. It occupies two rack slots in a modular drive cabinet and serves as a communication and I/O platform that links individual power sections to higher-level controllers. By providing both programming and runtime links over serial buses, the unit supports coordinated motion sequences and status reporting within industrial automation cells.
The electronics are powered from a nominal supply of 24 VDC, so the cabinet supply must deliver a regulated low-voltage source. During operation, the board draws up to 0.7 A, and this current helps determine auxiliary power supply and fuse sizing. Internal regulators and driver stages dissipate a maximum of 19.6 W, so enclosure airflow must remove that thermal load to keep component temperatures within limits. Incoming power should exhibit less than 4 Vpp ripple because higher noise can disturb the RS232, RS422, and RS485 transceivers as well as the watchdog circuit that carries 150 mA to external fault relays. The housing carries an IP20 rating, meaning it is finger-safe but must be mounted inside a closed electrical cabinet. A dedicated M5 ground stud bonds the unit to the common protective earth, and the maximum supply cable cross-section of 1.5 mm² fits standard cabinet wiring practices. Three internal expansion slots accept option cards for additional fieldbus channels or digital I/O.
The module has a height of 192 mm, a width of 83.7 mm, and a depth of 156 mm, which allows it to line up with adjacent drive sections on DIN rails or rear brackets. Its mass of 1.65 kg adds minimal load to the rack while keeping the assembly rigid enough for reliable card seating. Both the communication and programming interfaces are available simultaneously over RS232, RS422, or RS485, allowing direct access for setup and diagnostics.
Frequently Asked Questions about RECO MTS-R02.1:
Q: What supply voltage is required for the RECO MTS-R02.1 module?
A: The RECO MTS-R02.1 operates with a 24 VDC supply voltage for reliable integration into standard control systems.
Q: Which communication interfaces are available on the RECO MTS-R02.1 module?
A: This module features RS232, RS422, and RS485 as both communication and programming interfaces.
Q: How many expansion slots are present on the RECO MTS-R02.1?
A: Up to three expansion slots are available, allowing for modular upgrades and connections.
Q: What is the maximum current consumption for the RECO MTS-R02.1 module?
A: The RECO MTS-R02.1 supports a maximum current consumption of 0.7 A during operation.
Q: What is the protection rating of the RECO MTS-R02.1 module?
A: This module is rated IP20, offering basic protection against solid objects larger than 12.5 mm.
