PSI62C0.630-W1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat PSI62C0.630-W1 is a medium frequency inverter from the PSI Frequency Inverters series and weighs approximately 25 kilograms. It uses water cooling and offers an integrated power supply unit with a maximum output current of 2 Amps at 24 VDC. The inverter operates at a mains voltage of 400 to 480 VAC with a frequency of 50 or 60 Hz and has IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI62C0.630-W1 is a medium-frequency inverter manufactured by Bosch Rexroth Indramat within the PSI Frequency Inverters series. It converts three-phase supply power into controlled medium-frequency energy for induction heating, soldering, or hardening equipment used on automated lines. By regulating current and frequency, the unit provides stable thermal profiles that can be sequenced by a PLC, eliminating mechanical gear reductions and increasing energy efficiency. A built-in 24 V auxiliary supply and a sealed power section allow installation close to the load in cabinets equipped with water cooling.
The power stage accepts a three-phase input of 400–480 VAC and operates with factory networks running at 50 or 60 Hz. Internal components are cooled by a closed-loop water-cooled circuit. During continuous operation, the heat exchanger must dissipate up to 420 W of power loss. The housing has an IP20 protection rating, guarding against finger contact and solid objects larger than 12.5 mm while relying on the surrounding cabinet for additional protection. Compliance with climatic category 3K3 under EN 60721-3-3 supports operation in moderate humidity and limited airborne dust. Cooling flow, coolant temperature, and cabinet ventilation must remain suitable for the inverter’s operating conditions.
An integrated supply module delivers a stabilized output of 24 VDC with a maximum current of 2 A, powering contactors, sensors, and the DeviceNet interface that exchanges timer data with higher-level controllers. Continuous operation is permitted at ambient temperatures from +10 to +55 °C. During storage or transportation, the electronics can withstand temperatures from -25 to +70 °C. Despite the welded water jacket and sizable choke cores, the inverter weighs 25 kg. Appropriate lifting equipment should be used when positioning the unit, and the cabinet structure must be able to support its mass securely.
Frequently Asked Questions about PSI62C0.630-W1:
Q: What input voltage range does the PSI62C0.630-W1 frequency inverter support?
A: This model supports operation with mains voltages between 400 and 480 VAC.
Q: What cooling method is utilized on the PSI62C0.630-W1 inverter?
A: The PSI62C0.630-W1 uses water cooling to manage internal temperature during operation.
Q: What is the degree of protection for the PSI62C0.630-W1 inverter?
A: The degree of protection for this frequency inverter is rated at IP20.
Q: What are the output voltage and current ratings of the integrated power supply unit on the PSI62C0.630-W1?
A: The integrated power supply unit delivers a maximum output voltage of 24 VDC and up to 2 A of current.
Q: What is the permitted ambient operating temperature range for the PSI62C0.630-W1?
A: This inverter operates within a temperature range of +10 to +55 °C.
