PSI65C0.201-W1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat PSI65C0.201-W1 is a medium frequency inverter from the PSI Frequency Inverters series. It features water cooling, an integrated power supply with a 24 VDC output voltage and maximum 2 A output current, and operates on a mains voltage of 400 to 480 VAC at 50 or 60 Hz. The device has an IP20 degree of protection, weighs approximately 25 kg, and is designed for operation in temperatures from 10 to 55 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI65C0.201-W1 medium-frequency inverter is built by Bosch Rexroth Indramat for the PSI Frequency Inverters series. As a drive component, it converts fixed-frequency, three-phase mains power into a controllable medium-frequency output. This output can energize induction heaters, high-speed spindles, and other industrial loads that require adjustable power levels.
A liquid circuit removes heat through a water-cooled plate, preventing hot spots around the high-frequency switching devices during continuous operation near rated power. The enclosure has an IP 20 protection rating, so live parts are shielded from accidental finger contact, although the unit still requires installation inside a control cabinet. Control electronics and sensors can be supplied directly from the built-in auxiliary rail. The integrated supply delivers up to 24 VDC at 2 A, eliminating the need for a separate auxiliary power module when the connected load remains within this limit. The motor-side converters accept a three-phase mains input of 400 - 480 VAC, allowing the inverter to operate on common factory power systems.
Input synchronization with a 50 or 60 Hz line frequency allows the inverter to work with common international power systems while its switching section produces the required medium-frequency output. The cooling circuit removes up to 420 W of heat, which helps determine the necessary water-chiller capacity and coolant flow rate. The permissible operating temperature range is +10 to +55 °C, while storage and transportation are permitted from -25 °C to +70 °C. Environmental classification 3K3 under EN 60721-3-3 indicates suitability for clean, temperature-controlled industrial facilities. A PROFIBUS timer interface coordinates runtime operation with external controllers and supports communication within an automated system. The assembly weighs approximately 25 kg, so the cabinet structure and mounting hardware must provide adequate support during installation and operation.
