PSI63C0.100-L1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911333056
The Bosch Rexroth Indramat PSI63C0.100-L1 is a medium frequency inverter from the PSI Frequency Inverters series. It features air cooling, IP20 protection, and operates with a mains voltage of 400 to 480 VAC at 50 or 60 Hz. The integrated power supply unit provides a maximum output current of 2 A at 24 VDC, and the inverter weighs approximately 20 kg.
Internal Product Review
The PSI63C0.100-L1 is a medium frequency inverter from Bosch Rexroth Indramat with air-cooled operation for dependable thermal management. IP20 protection and a 400 - 480 VAC mains rating make the unit well suited for controlled industrial cabinet installations. A built-in 24 VDC power supply rated at up to 2 A adds useful system support for streamlined integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI63C0.100-L1 medium-frequency inverter is produced by Bosch Rexroth Indramat as part of the PSI Frequency Inverters series. In an automation cell, it converts three-phase mains energy into a modulated output suitable for induction heating generators, dielectric welders, and other equipment that requires controlled medium-frequency power. By integrating the power section, control electronics, and an auxiliary supply in one frame, the unit simplifies cabinet wiring and minimizes the need for external components. Its approximate weight of 20 kg supports installation in a properly rated panel assembly.
Mains compatibility spans 400–480 VAC three-phase networks with fundamental frequencies of 50 or 60 Hz, permitting installation on standard industrial supplies without transformers. Thermal management relies on an air-cooled design that directs airflow through the inverter. With this arrangement, the unit dissipates up to 360 W of cooling losses that must be vented from the enclosure. The control electronics have an enclosure protection rating of IP20, so the device requires installation inside a switchgear cabinet. Proper conductor sizing, breaker selection, and ventilation clearances are necessary when the inverter is integrated into a process line.
An integrated auxiliary rail supplies 24 VDC at a maximum current of 2 A, allowing compatible sensors or interlock coils to be powered directly. This auxiliary rail also supports the internal 24 V timer function without requiring an additional converter. Continuous operation is permitted within an ambient temperature range of +10 to +55 °C, which allows use in temperature-controlled industrial cabinets. The unit can be stored or transported within a temperature range of -25 to +70 °C without damage to its power modules or control boards. Cabinet ventilation must maintain the permitted operating temperature while removing heat from the power electronics. During storage and transportation, the equipment should remain within the stated limits before it is returned to service.
