PSI6300.356-L1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat PSI6300.356-L1 belongs to the PSI Frequency Inverters series and is an air cooled, medium frequency inverter with a protection rating of IP20. It operates with a mains voltage of 400 to 480 VAC at 50 or 60 Hz and features an integrated power supply unit providing up to 2 Amps at 24 VDC. The inverter weighs approximately 20 kilograms and supports operation within a temperature range of 10 to 55 degrees Celsius.
Internal Product Review
The PSI6300.356-L1 is a medium frequency inverter built for dependable industrial drive service, with 400-480 VAC mains input and 50/60 Hz operation. Air-cooled construction and IP20 protection support clean cabinet integration and stable thermal management in controlled environments. A 24 VDC integrated power supply rated to 2 A adds practical system support and rounds out a well-engineered inverter package.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI6300.356-L1 is a medium-frequency inverter manufactured by Bosch Rexroth Indramat for the PSI Frequency Inverters series. It converts fixed-frequency mains power into a variable, higher-frequency output suited for induction heating, high-speed spindles, and other motion tasks that require precise frequency control during automated production. An integrated auxiliary supply and an INTERBUS timer interface allow the unit to exchange status information and gating commands with PLC hardware. Rated for climatic category 3K3, the inverter is intended for clean, ventilated control cabinets rather than exposed process areas.
The power stage accepts three-phase 400 to 480 VAC at 50 or 60 Hz, allowing operation with the 415 V and 460 V power grids used in many plants. An IP20 housing protects against accidental contact with live parts while permitting the free convection required by its air-cooled design. The built-in converter supplies the control electronics with 24 V DC and provides a continuous output current of 2 A, eliminating the need for a separate DIN-rail power supply. This auxiliary output can support peripheral sensors, relays, and fieldbus transceivers when the main inverter section is disabled during a machine safety stop. The accepted voltage and frequency ranges must be considered when selecting upstream protection and connecting the unit to the plant power system.
Heat dissipation from the switching devices is limited to 360 W, and cabinet airflow or ducting must remove this heat to keep semiconductor junction temperatures within their permitted limits. The inverter can operate when the ambient temperature remains between +10 and +55 °C. When powered down, the unit can be stored at temperatures from -25 to +70 °C without damage. Installation is manageable because the inverter weighs 20 kg and uses standard mounting holes on its backplane. INTERBUS timing supports synchronized frequency ramps, while the air-cooled design avoids liquid circuits and external heat exchangers that would otherwise complicate the control-panel layout.
