PSI62C0.201-W1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat PSI62C0.201-W1 is a medium frequency inverter from the PSI Frequency Inverters series. It features water cooling, operates with a mains voltage of 400 to 480 VAC at 50 or 60 Hz, and offers IP20 protection. The unit has an integrated 24 VDC power supply with a maximum 2 Amp output and weighs approximately 25 kg.
Internal Product Review
The PSI62C0.201-W1 is a Bosch Rexroth Indramat medium frequency inverter with water-cooled thermal management and a 400 to 480 VAC input range. IP20 protection and an integrated 24 VDC power supply rated at 2 A support clean panel integration and dependable auxiliary circuit support. Strong industrial appeal is further backed by PROFIBUS communication and stable operation across a +10 to +55 °C temperature range.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI62C0.201-W1 is a medium-frequency inverter manufactured by Bosch Rexroth Indramat for the PSI Frequency Inverters series. Within an automation cell, the device converts fixed industrial mains power into a regulated medium-frequency output for induction heating systems, hardening stations, and other processes that require rapidly adjustable power in the kilohertz range. It fits inside enclosed control cabinets and interfaces with plant controllers to adjust output amplitude or shut down power on command, making it a central component in energy-intensive thermal processes. An internal low-voltage section supports gate drives and user electronics, reducing the number of external modules needed for operation.
At the input, the inverter accepts three-phase power from 400 to 480 VAC and operates on utility grids running at 50 or 60 Hz, so transformer adjustments are unnecessary when machinery is installed in regions with either frequency. The power stage is water-cooled, allowing the heat sink to transfer thermal energy into an external coolant circuit rather than the surrounding cabinet air. With the required coolant flow, the assembly releases 420 W of thermal loss to the coolant, helping maintain a stable enclosure temperature during continuous operation. The housing has an IP20 protection rating, which prevents accidental contact with live parts but requires installation inside a switchgear cabinet. An onboard auxiliary source supplies a continuous current of 2 A to field devices, allowing relays and sensors to operate without a separate external source.
Continuous operation is permitted at ambient temperatures from +10 to +55 °C, while storage is permitted from -25 to +70 °C under the applicable 3K3 climatic category in EN 60721-3-3. The integrated auxiliary rail provides 24 VDC to distributed logic and other compatible low-voltage devices. Motion and process commands are exchanged through the PROFIBUS interface, supporting coordinated sequencing with drives, programmable logic controllers, and other automation equipment. Despite its liquid-cooled heat sink, the inverter has a mass of 25 kg, which must be considered when selecting cabinet supports and mounting hardware.
